Shindaiwa DGW310MC, DGW310DMC owner manual Long-Term Storage, Change Coolant/Water

Page 38

1 Open＜ the top door.

2 Remove the radiator cap.

3 Remove the water drain plug.

4 After draining all the water, reinstall the water drain plug.

(6) Change Coolant/Water

Change

At 2000 hrs or 2 yrs

Total capacity: 3L (including Sub Tank: 0.6L

）＞

Top Door

Radiator Cap

Water Inlet

Caution		＞	Sub Tank
＜
	Change the packing whenever changing
	coolant/water.
	Packing Part No.: 6C090 58961 (Kubota)
5 Replace all the water in the sub tank.
6 Fill water to Max Level (to the water inlet)
7 Reinstall the radiator cap.			Coolant Drain Plug
8 Close the top door.			ﾞ

Caution		＞
＜
	After supplying water, keep the engine drive for

a while to check no water leakage and then stop the engine

12. Long-Term Storage

Danger: Electric Shock

.When performing check and maintenance, always stop the engine

Caution: Injuries

When performing check and maintenance always stop the engine

△Caution: Fire/Burns

Keep the equipment far away from fire.

Do not touch the engine and muffler during operation or immediately after stopping the equipment for the temperature reaches extremely high.

36

Image 38

Contents DGW310DMC DGW310MC Page Introduction Other types of caution Even som e of the items notedSafety Guidelines Page Page Location of warning labels Specifications DGW310DMC DGW310MCUse DGW310DMC DGW310MC DGW310DMC Frequency Selection Eco WeldingDisplay Monitor LampOil Pressure Monitor Lamp Water Temperature Monitor LampBattery Charge Monitor Lamp Remote Control Box Option How to connect remote control boxElcb and Grounding Stop RUN GroundingOperation Check StopSlow-down』Feature Elcb has activatedSAE30 SAE20 Filling the radiator Filling the sub tankFull Fuel Fuel, Engine Oil and Water LeakageBattery Fluid level is lower than the Lower levelStarting StartKeep the engine idle for about 5 minutes Stopping Selection Welding CablePolarity Connection Welding CableWelding DGW310DMCMIN MAX ECO ECODGW310MC 21-P 200/220V P 200/220V 3-P 4-WiresOutput Range P 100/110VOutput Power ConsumptionOutput Limitation Operation 』29 Simultaneous use of Generating and Welding Check and Maintenance Check Time Check Items Startup 1Change Engine Oil Clean/Change Air Element Change Oil FilterClean/Change Fuel Strainer CloseLong-Term Storage Change Coolant/WaterTroubleshooting Regular Dual（） Memo