Shindaiwa DGW310MC, DGW310DMC owner manual Operation

Page 30

9-3. Operation

Danger: Electric Shock

Before connection or disconnecting a load cable from the receptacle, always turn the circuit breakers (3-P and 1-P) to OFF. And stop engine and remove the engine key. A person to perform it should always keep the key.

Ground every grounding terminal to the earth as set in the manual.

If even one of all is unconnected, by mistake or accident, it must be much more dangerous for human body than NO CONNECTION, because a leaking current inevitably goes through the body.

Even though all the current leakage relays in the loads have been grounded to the earth, the grounding terminal and the bonnet (canopy) should be grounded to the earth.

Grounding should be made after the engine is stopped.

Whenever the current leakage breaker activates, you should repair the leaking point first of all.

￿Caution: Injuries

Be sure to connect to the output terminals or insert a plug to a receptacle, after confirming that all the switches in the loads are positioned at OFF.

Be sure to select the correct frequency, designated in the loads.

￿Caution: Damage to the property – Aftermath

Whenever connecting to use medical equipment or appliances, be sure to consult with the medical equipment company, doctor or hospital personnel.

Be sure to select the correct frequency, designated in the loads.

Otherwise the loads may be damaged.

28

Image 30
Contents DGW310DMC DGW310MC Page Introduction Other types of caution Even som e of the items notedSafety Guidelines Page Page Location of warning labels Specifications DGW310DMC DGW310MCUse DGW310DMC DGW310MC DGW310DMC Frequency Selection Eco WeldingDisplay Monitor LampWater Temperature Monitor Lamp Battery Charge Monitor LampOil Pressure Monitor Lamp Remote Control Box Option How to connect remote control boxElcb and Grounding Stop RUN GroundingOperation Check StopSlow-down』Feature Elcb has activatedSAE30 SAE20 Filling the sub tank FullFilling the radiator Fuel Fuel, Engine Oil and Water LeakageBattery Fluid level is lower than the Lower levelStarting StartKeep the engine idle for about 5 minutes Stopping Selection Welding CablePolarity Connection Welding CableWelding DGW310DMCECO DGW310MCMIN MAX ECO 21-P 200/220V P 200/220V 3-P 4-WiresOutput Range P 100/110VPower Consumption Output LimitationOutput Operation 』29 Simultaneous use of Generating and Welding Check and Maintenance Check Time Check Items Startup 1Change Engine Oil Clean/Change Air Element Change Oil FilterClean/Change Fuel Strainer CloseLong-Term Storage Change Coolant/WaterTroubleshooting Regular Dual( ) Memo