Graco Inc 308584 manual Instructions-Parts List, psi 0.7 MPa, 7 bar Maximum Working Pressure

INSTRUCTIONS-PARTS LIST

This manual contains important warnings and information.

READ AND KEEP FOR REFERENCE.

INSTRUCTIONS

Model PRO 3500wbt

Electrostatic Air Spray Gun

100 psi (0.7 MPa, 7 bar) Maximum Working Pressure

Part No. 222700, Series C

For use when electrostatically spraying con- ductive, waterborne fluids that meet at least one of the following conditions for non-flamma- bility:

1.The fluid has a flash point above 140_F (60_C) and a maximum organic solvent concentration of 20%, by weight, per ASTM Standard D93.

2.The fluid does not sustain burning when tested per ASTM Standard D4206 Sus- tained Burn Test.

NOTE: The PRO 3500wb spray gun is Factory Mutual approved for use with Graco isolation systems. The spray gun is also approved for use with other Factory Mutual approved voltage isolations systems provided that the fluid hose is assembled as shown in Fig. 6, page 13. Any modification of genuine Graco parts or replacement of parts with non-Graco parts will void agency approvals.

U.S. PATENT NO. 4,290,091; 4,219,865; 4,497,447; 4,462,061; 4,660,774 ; D313,064; 4,978,075 Patented 1986, 1987 Canada

Brevete 1986, 1987

U.K. PATENT NO. 2,147,158; 2,142,559B; 2,140,327B French Patent No. 89 16305

Other U.S. and Foreign Patents Pending

308584

Rev. H

05148B

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

ECOPYRIGHT 1995, GRACO INC.

Graco Inc. is registered to I.S. EN ISO 9001