Graco Inc 3500WB, 308584, 222700 manual Technical Data, Category

Technical Data

Category	Data
Weight	1.87 lb (0.85 Kg)
Gun Length	9.5 in. (240 mm)
Maximum Working	100 psi (0.7 MPa, 7 bar)
Pressure
Air Pressure Operating	0–100 psi (0–0.7 MPa,
Range	0–7 bar)
Fluid Pressure Operating	0–100 psi (0–0.7 MPa,
Range	0–7 bar)
Voltage Output	0–65 kV*
Air Inlet	1/4 npsm(m) L.H.
Fluid Inlet	custom inlet for Graco
	waterborne fluid hose
Fluid Specification	For use with fluids that
	meet at least one of the
	following conditions:
	D The fluid has a flash
	point above 140_F
	(60_C) and a maxi-
	mum organic solvent
	concentration of 20%,
	by weight, per ASTM
	Standard D93.
	D The fluid does not
	sustain burning when
	tested per ASTM
	Standard D4206 Sus-
	tained Burn Test.

Category	Data
Wetted Parts	Stainless Steel, Brass,
	Nylon, Acetal, PTFE,
	Fluoroelastomer, PTFE
	High Molecular Weight
	Polyethylene, Ceramic
Typical Noise Level with
atomization air at 40 psi
(280 kPa, 2.8 bar) and
typical air flow
Sound Pressure {	87 Db(A)
Sound Power }	90.4 Db(A)
Maximum Noise Level
with atomization air at
100 psi (0.7 MPa, 7 bar)
and maximum air flow
Sound Pressure {	99 Db(A)
Sound Power }	105.4 Db(A)

{Sound pressure was measured per Cagi Pneurop, 1969.

}Sound power was measured per ISO–3744, 1981.

*Voltage output when used with Graco H2O PRO is 0–59 kV due to bleed resistor current draw.

Vitonr is a registered trademark of the

DuPont Co.

Loctiter is a registered trademark of the Loctite Corporation.

308584 51