Graco Inc 308584, 3500WB, 222700 manual The Graco Warranty and Disclaimers, Graco Phone Number

Page 52

The Graco Warranty and Disclaimers

WARRANTY

Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. As purchaser’s sole remedy for breach of this warranty, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment proven defec- tive. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written rec- ommendations.

This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility with Graco equipment of structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, instal- lation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claim. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor and transportation.

DISCLAIMERS AND LIMITATIONS

The terms of this warranty constitute purchaser’s sole and exclusive remedy and are in lieu of any other warranties (express or implied), including warranty of merchantability or warranty of fitness for a particular purpose, and of any non–contractual liabilities, including product liabilities, based on negligence or strict liability. Every form of liability for direct, special or consequen- tial damages or loss is expressly excluded and denied. In no case shall Graco’s liability exceed the amount of the purchase price. Any action for breach of warranty must be brought within two (2) years of the date of sale.

EQUIPMENT NOT COVERED BY GRACO WARRANTY

Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose, with respect to accessories, equipment, materials, or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motor, switches, hose, etc.) are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

Graco Phone Number

TO PLACE AN ORDER, contact your Graco distributor, or call this number to identify the distributor closest to you:

1–800–367–4023 Toll Free

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Sales Offices: Minneapolis, Detroit

International Offices: Belgium, Korea, Hong Kong, Japan

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

www.graco.com

PRINTED IN U.S.A. 308584 August 1995 Revised September 2000

52 308584

Image 52
Contents INSTRUCTIONS-PARTS LIST 308584100 psi 0.7 MPa, 7 bar Maximum Working Pressure Part No. 222700, Series CTable of Contents SymbolsWarning Symbol Caution SymbolELECTRIC SHOCK HAZARD PRESSURIZED EQUIPMENT HAZARD FIRE AND EXPLOSION HAZARDWarnings are continued on the next page EQUIPMENT MISUSE HAZARD TOXIC FLUID HAZARDIntroduction Spraying Waterborne Fluids ElectrostaticallyOperating the Electrostatics Refer to Fig. 1, pageB A C Graco Waterborne Fluid Hose purchased separately D Inner Hose Layer EE is a PTFE tubeD Conductive Hose Layer DD covers the PTFE tube H2O PRO Voltage Block connection shownInstallation Installing the SystemVentilate the Spray Booth Warning SignsConsult your isolation system manual for other configurations PRO 3500wb Gun shown with the Graco H2O PRO Batch SystemT S N K L M G F NH R B A E D P CInstall the Air Line Accessories Install the Fluid LIne AccessoriesConnect the Air Line Connect the Exhaust TubeConnect the Fluid Hose Filter the FluidContinued on the next page H2O PRO Voltage Block Connect the Fluid Hose continuedconnection shown Ground the System FIRE, EXPLOSION, AND ELECTRIC SHOCK HAZARDCheck the Electrical Grounding Pressure Relief Procedure Fluid Voltage Discharge and Grounding ProcedureOperation Operating Checklist Selecting a Fluid Nozzle and Air CapFIRE AND EXPLOSION HAZARD Operating the Spray GunCOMPONENT RUPTURE HAZARD Atomizing Air Valve Adjustment Fine Adjustments of the Spray GunDaily Care and Cleaning MaintenanceShutdown Clean the Air Cap and Fluid Nozzle ProcedureFlush the Spray Gun Equipment neededTroubleshooting Voltage Loss TroubleshootingSpray Gun Waterborne Fluid HoseVoltage Loss Troubleshooting continued TestsElectrical Troubleshooting ProblemSolution CauseSpray Pattern Troubleshooting Poor Electrostatic Wrap Troubleshooting Gun Operation TroubleshootingGun Operation Troubleshooting continued Electrical Tests Test Gun ResistanceTest Power Supply Resistance Test Resistor Stud ResistanceService Prepare the Gun for ServiceAir Cap/Nozzle/Resistor Stud Replacement Tools Included with the GunAir Cap/Nozzle/Resistor Stud Replacement continued InstallationElectrode Needle Replacement Preventative Maintenance If installing the complete fluid rod assembly, go to step 11, pageFluid Packing Rod Removal and Repair WhereFluid Packing Rod Removal and Repair continued Fan Air Adjustment Valve Repair Fluid Adjustment Assembly RepairIf installing the complete valve, go to step DETAILAir Trigger Valve Repair Fluid Adjustment Assembly Repair continued Apply a very light coat of lubricant to the o-rings 41 Atomizing Air Valve Repair MOVING PARTS HAZARD ES ON-OFF Valve Repair05363B Barrel Removal  Apply a very light coat of lubricant to the o-rings 37a Power Supply Replacement Do not expose the gasket 18a to solvents Barrel Installation Turbine Alternator Replacement05158B Graco Waterborne Fluid Hose Repair Measurements, inches mmNOTE Keep all the following parts for reassembly PRO 3500SC Gun DisassemblyPRO 3500sc Gun Conversion Installing the Fluid Needle Assembly 10. Tighten the nut 78* onto the ferrule housing Spray Gun Parts See Detail AEQUIPMENT MISUSE HAZARD Part No. 222700, Series C Model PRO 3500wb Spray GunY Replacement Warning signs are available at no cost DescriptionAccessories Use Only Genuine Graco Parts and AccessoriesWaterborne Fluid Hose Assembly 100 psi 0.7 MPa, 7 bar Maximum Working PressureFor use in the Fluid Voltage Discharge and Ground- ing Procedure Manual Change SummarySnap Ring Pliers Gun High Voltage Probe & MeterPage Category Technical DataData The Graco Warranty and Disclaimers Graco Phone NumberWARRANTY EQUIPMENT NOT COVERED BY GRACO WARRANTY