MACHINE DATA
SHEET
Customer Service #: (570)
MODEL G0705 DRILL/MILL WITH STAND 29 INCH X 8 INCH
TABLE
Product Dimensions: |
|
Weight | 617 lbs. |
Length/Width/Height | |
Foot Print (Length/Width) | |
Shipping Dimensions: |
|
Carton #1 |
|
Type | Plywood |
Content | Machine |
Weight | 683 lbs. |
Length/Width/Height | 38 x 30 x 46 in. |
Carton #2 |
|
Type | Cardboard |
Content | Stand |
Weight | 99 lbs. |
Length/Width/Height | 29 x 18 x 22 in. |
Electrical: |
|
Power Requirement | 220V, |
Minimum Circuit Size | 30A @110V, 15A @220V |
Switch | Front Mounted Forward Reverse Switch with Emergency Stop |
Switch Voltage | 220V |
Cord Length | 6.5 ft. |
Cord Gauge | 14 gauge |
Plug Included | NEMA |
Recommended Plug/Outlet Type | NEMA |
Motors: |
|
Main |
|
Type | TEFC Capacitor Start Induction |
Horsepower | 2 HP |
Voltage | 110V/220V |
Prewired | 220V |
Phase | Single |
Amps | 17.8/8.6 |
Speed | 1725 RPM |
Cycle | 60 Hz |
Number Of Speeds | 1 |
Power Transfer | Belt Drive |
Bearings | Shielded and Permanently Sealed |
Model G0705 | The information contained herein is deemed accurate as of 12/20/2010 and represents our most recent product specifications. | PAGE 1 OF 3 |
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. | ||
Model G0705 (Mfg. since 09/09) |