SECTION 4: OPERATIONS
To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all times to reduce this risk.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, review industry trade magazines, or get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Model G0705 (Mfg. since 09/09)
Operation Overview
The purpose of this overview is to give the opera- tor a basic understanding of how this machine
To complete a typical operation, the operator does the following:
1.Loosens the vertical travel locks, then adjusts the headstock height above the table to ensure there is sufficient room to install the tooling in the spindle and the workpiece on the table.
2.Installs the desired tooling for the job.
3.Positions the workpiece as needed for the operation, then clamps the workpiece using applicable clamping devices, or a vise that is already mounted on the table, to ensure the workpiece does not move during the milling/ drilling operation.
4.Positions the cutter or drill bit near the workpiece, then tightens vertical travel locks.
5.Selects the appropriate spindle speed for the milling or drilling operation using the speed selector knob and variable spindle speed knob.
6.Unlocks the X- and
7.Wears safety glasses or a face shield.