Appendix B Cable and Connector Specifications
Uplink Port Transceiver Modules
Uplink Port Transceiver Modules
Transceiver modules that plug into the front panel of the supervisor engine or route switch processor provide the uplink ports for the router. Several types of transceiver modules are available:
small form-factor pluggable (SFP) modules, X2 modules, XENPAK modules, and Gigabit Interface Converter (GBIC) modules.
Table B-1lists the orderable part numbers for supported transceiver modules. In addition, the following tables provide information about the modules and their cabling specifications:
•Table B-2and Table B-3provide information about 1GE uplink ports.
•Table B-4and Table B-5provide information about 10GE uplink ports.
•Table B-6provides information about 1GE GBIC modules.
Table B-1 Uplink Port Transceiver Modules
Supervisor Engine or RSP | Transceiver Module Part Numbers |
| |
RSP720 and | 10GE Uplink Ports (RSP720-10GE only): |
RSP720-10GE | X2-10GB-SR |
|
| X2-10GB-LR |
| X2-10GB-ER |
| X2-10GB-LX4 |
| X2-10GB-CX4 |
| 1GE Uplink Ports: |
| GLC-SX-MM |
| GLC-LH-SM |
| GLC-ZX-SM |
| GLC-T |
| GLC-BX-D |
| GLC-BX-U |
| SFP-GE-S |
| SFP-GE-L |
| SFP-GE-T |
| |
Supervisor Engine 720 | GLC-SX-MM |
| GLC-LH-SM |
| GLC-ZX-SM |
| GLC-T |
| |
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
