Cisco Systems 7600 manual Contents, Document History

Preface

This guide describes the route switch processors and supervisor engines supported by Cisco 7600 series routers. It also provides technical specifications for these modules and describes cable and connector specifications.

Caution Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS3260) should install, replace, or service the equipment described in this document.

Contents

This preface contains the following sections:

•Document History, page vii

•Document Organization, page viii

•Document Conventions, page viii

•Related Documentation, page ix

•Obtaining Documentation, Obtaining Support, and Security Guidelines, page x

Document History

Table 1 lists the technical changes made to this document since it was first printed.

	Table 1	Document History
	Revision		Date	Change Summary
	OL-10100-04		January 2008	Added information about the Route Switch Processor 720 with
				10-GE uplink ports, introduced in Cisco IOS Release 12.2SRC.
	OL-10100-03		May 2007	Removed eFSU from the list of unsupported features for the Route
				Switch Processor 720. Beginning in Cisco IOS Release 12.2SRB1,
				eFSU and ISSU are supported on the RSP720, Sup720, and Sup32.
				Added a note that Cisco IOS Release 12.2SXF is the last release in
				which the Supervisor Engine 720 (with PFC3A) is supported.
			Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
OL-10100-04					vii