Cisco Systems 7600 manual Unsupported Chassis and Modules, Unsupported Features

Page 25

Chapter 2 Route Switch Processors and Supervisor Engines

RSP720 with 10GE Uplink Ports

10 gigabits per second (Gbps) on both 10GE ports

1 Gbps on all three 1GE ports

16 Gbps backplane forwarding

When all five uplink ports are operational, the total bandwidth for uplink traffic is 20 Gbps (20 GE).

The RSP720-10GE provides flexible memory options like the RSP720. The RSP720-10GE ships with 2-GB memory on the route processor (RP) and 1-GB memory on the switch processor (SP). Memory options are available to upgrade to 4-GB memory on the RP and 2-GB memory on the SP.

The RSP720-10GE supports Route Processor Redundancy (RPR) mode. However, uplink ports on the standby supervisor will be unusable.

See the “RSP720-10GE Usage Guidelines and Limitations” section on page 2-10for information about things to consider when you use the RSP720-10GE.

Supported Chassis, Line Cards, and Modules

The RSP720-10GE supports the following chassis and modules:

Supported on the Cisco 7604 and 7609 chassis and the Cisco 7603-S, 7606-S, and 7609-S chassis

Note If you insert an RSP720-10GE into an unsupported chassis, the RSP720-10GE drops to ROMmon and only the console is accessible.

SPA interface processors (SIPs) and their shared port adapters (SPAs): 7600-SIP-600, 7600-SIP-400, and 7600-SIP-200

Enhanced FlexWAN module (WS-X6582-2PA)

Ethernet services modules: 2-port 10 GE line card (7600-ESM-2X10GE) and 20-port 1 GE line card (7600-ESM-20X1GE)

Distributed Forwarding Cards: DFC3C, DFC3CXL, DFC3B, DFC3BXL

LAN cards (which require CFC or DFC): WS-X6704-10GE, WS-X6724-SFP, WS-X6748-SFP, WS-X6748-GE-TX, WS-X6708A-10GE, WS-X67xxA series, WS-X6148-FE-SFP, WS-X6148A-GE-TX

Uplink port transceiver modules: see Appendix B, “Cable and Connector Specifications”

Note The RSP720-10GE also supports two new 8-port 10GE line cards (WS-X6708-10G-3C and WS-X6708-10G-3CXL). The line cards, which provide 2-to-1 oversubscription, are available in Cisco IOS Release 12.2SRC and later.

Unsupported Chassis and Modules

The RSP720-10GE does not support the following chassis and modules:

Unsupported chassis: Cisco 7603, 7606, and 7613 chassis

Unsupported modules: Services modules, Optical Service Modules (OSMs), FlexWAN module

Unsupported Features

In Cisco IOS Release 12.2SRC, the RSP720-10GE does not support the following features, which are supported on the RSP720:

Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide

 

OL-10100-04

2-9

 

 

 

Image 25
Contents Text Part Number OL-10100-04 Americas HeadquartersCopyright 2007-2008 Cisco Systems, Inc. All rights reserved N T E N T S Safety Precautions for Module Installation and Removal Cleaning the Fiber-Optic Connectors B-15 OL-10100-04 Document History ContentsDocument Conventions Document OrganizationChapter Title Description Convention DescriptionRelated Documentation OL-10100-04 Cisco 7600 Series Routers Cisco 7600 Product OverviewSupported Hardware Feature Description FeaturesFeature Description Physical Interface Addresses Port AddressesFAN Status MAC AddressesRoute Switch Processors Supervisor Engines Overview Product Number Description RSP720-3CXL-GE Product NumberWS-SUP32-GE-3B WS-SUP720-3BXL WS-X6K-S2-MSFC2 Route Switch Processor WS-X6K-S2U-MSFC2 WS-X6K-S2-PFC2Unsupported Hardware and Features RSP720 FeaturesSupported Chassis, Line Cards, and Modules RSP720 with 10GE Uplink Ports RSP720-10GE FeaturesUnsupported Chassis and Modules Unsupported FeaturesQoS on the RSP720-10GE RSP720-10GE Usage Guidelines and LimitationsQoS Configuration Guidelines Front-Panel Controls RSP720, RSP720-10GE, Sup720, Sup32 Supervisor Engine 720 and Supervisor EngineComponent Description Front-Panel LEDs RSP720, RSP720-10GE, Sup720, Sup32Color Description Supervisor Engine 2 Front Panel Supervisor EngineSection on page 3-10 for more information Off when you insert a card Preparing for Installation or Removal Preventing Electrostatic Discharge Damage Safety Precautions for Module Installation and RemovalDetermining Module Location Tools Required for Module InstallationModule Slot Assignments Module Installing a Supervisor Engine or Route Switch ProcessorEjector Levers and Captive Installation Screws See Figure Removing a Supervisor Engine or Route Switch Processor Removing and Replacing Memory Hot Swapping OIR ModulesConnecting a Terminal Connecting to the Console PortConnecting a Modem Connecting to the Uplink PortsSupervisor Engine Module Uplink Ports Locating the Flash PC Card Write-Protection Switch Using Flash Memory CardsInstalling a Flash Memory Card Determining Software Feature Support Power Management and Environmental MonitoringRemoving a Flash Memory Card Specification Module SpecificationsRegulatory Standards Compliance OL-10100-04 Limiting Connection Distances Cable and Connector SpecificationsTransceiver Module Part Numbers Uplink Port Transceiver ModulesProduct ID Description 1GE Uplink Ports and Cabling SpecificationsSMF MMFSMF ITU-T 10GE Uplink Ports and Cabling SpecificationsGbic Module Cabling Specifications Console Port Cabling Specifications and PinoutsConsole Port Cabling Specifications MHz km MicronRate bps Distance feet Distance meters Console Port Signals and PinoutsRJ-45-to-RJ-45 RJ-45-to-DB-9 Console Signal RJ-45 Pin DB-9 PinRollover Cable DeviceRJ-45-to-DB-25 Terminal Console Rollover Cable Modem Adapter Signal RJ-45 Pin DB-25 PinRJ-45-to-RJ-45 RJ-45-to-DB-25 RTS DTRConsole Port Mode 2 Signaling and Pinouts Sup2 Only RJ-45 ConnectorConsole Port Console Device RD+ TD+ Not used Side 2 Pin SignalSC Connectors Fiber-Optic ConnectorsSide 1 Pin Signal Side 2 Pin Signal Figure B-5 SC Optical Connector MT-RJ ConnectorsFigure B-7 LC Fiber-Optic Connector LC ConnectorsCleaning the Fiber-Optic Connectors Patch Cord LX/LH Gbic and MMF Cable ConsiderationsPatch Cord Installation OL-10100-04 MAC Active LEDActive Console GBICs, connecting to Gigabit Ethernet cablesLX/LH Gbic Link LEDPWR Mgmt LED NvramSystem LED Status LED
Related manuals
Manual 28 pages 32.67 Kb Manual 12 pages 20.11 Kb Manual 20 pages 62.17 Kb Manual 10 pages 7.94 Kb