ATON DH44 manual System Design Overview/Applications, Planning

DH44 4 Source, 4 Zone Digital Audio Router

2. System Design Overview/Applications

Planning

Before installing the DH44, it is essential to have a detailed and accurate system design. The

first step to a good design is to map the system. It is advisable to mark up a copy of the house fl oor plan with speaker, Touch Pad and equipment locations, etc. Make sure that all locations are decided upon before pre-wiring so that all necessary wiring and installation hardware is in place.

It is essential that ALL system components are accounted for prior to the pre-wire stage. After establishing design goals, make a detailed list of all components. Include source equipment, Touch Pads, expansion Routers, local source wall plates, IR emitters, etc.

	Local Source
	Audio	Speakers
	Cables	DHTP1
		Cat-5
		16/2
Sources	DHSIP	Speaker
		Wire
		Cat-5

DH44

Audio

Cables

Cat-5

DH46X

	Cat-5	16/2	Speakers
DHSIP		Speaker
		Wire
	Cat-5
Audio	DHTP1
Cables

Local Source

Figure 2-1 : System Wiring Overview

Note: For clarity, Figure 2-1 shows a single zone connected to a DH44 and a single zone connected to a DH46X Expansion Router.

© 2008 • All rights reserved. 9