ATON DH44 manual Ir Out/All Ir Out, Page/Doorbell Audio and Trigger Input PG/DB Trig

Page 19

DH44 4 Source, 4 Zone Digital Audio Router

IR OUT/ALL IR OUT

ATON DHTP1 Amplified Touch Pads feature a built-in IR Receiver that is used to control the sources connected to the DH44 using hand-held remotes. The four IR ports labelled 1-4are Source-Specific. When a particular source is selected in a zone, the corresponding IR port is active and only the selected source receives IR. This allows for same-branded or identical source components to be controlled discreetly from one location without confl ict. The ALL IR PORT is constantly active and passes IR information regardless of the source selected. This is useful for sources that may need control no matter which source is active, such as an A/V Receiver, or for applications utilizing an expanded IR network including IR Distribution devices such as ATON’s AIB4 Amplified IR Connection Block.

To make IR connections, simply plug a standard 3.5mm IR emitter such as ATON’s AIE2 Talk- back IR Emitter into the desired port. If the source that is to be connected has an IR Input port, a 3.5mm (“mini-to-mini”) interconnect cable can be used instead. See Figure 3-6for details.

Satellite 1

DVD

 

 

 

 

 

 

AIE2

Talk-Back

Emitter

Satellite 2

A/V Receiver

CD

Figure 3-6: IR Outputs

Page/Doorbell Audio and Trigger Input (PG/DB TRIG IN)

When a Page/Doorbell (PG/DB) system is utilized with the DH44, connect the PG/DB Trigger Output of the PG/DB system to the DH44 as shown below. Connect the PG/DB Audio Output of the PG/DB system to the Left Analog Audio Input of Source Input 4 of the DH44.

PG/DB System

PG/DB

PG/DB

AUDIO OUT

TRIGGER OUT

3.5mm Mono

Interconnect

Cable

RCA

Audio

DH44 Cable

Figure 3-7: Page/Doorbell Audio and Trigger Connections

Note: In this application, the Analog Audio Input for Source 4 will not function except for PG/DB. Both of the Digital Inputs (Coaxial and Optical) will function, however. Make sure to set the COAX/OPT/RCA switch to correct setting.

© 2008 • All rights reserved.

17

Image 19
Contents DH44 Page All rights reserved Safety InformationPrecautions Operating Temperatures & EnvironmentsCaring For the DH44 Contents Introduction Aton DH44 Accessories FeaturesDefining Terms Indicator/Button FunctionFront Panel Description Function Rear PanelDH44 4 Source, 4 Zone Digital Audio Router Planning System Design Overview/ApplicationsPre-Wiring Basic 4 Zone, 4 Source System ApplicationsBasic 4 Zone, 4 Source System w/ Local Sources Expanded System 4 Sources/10 Zones + Local Sources Expanded 4 Source, 8-28 Zone SystemSource Audio Inputs ConnectionsAudio Source Source Input Digital Coaxial Expansion OUT DH46X DH44Source Loop Outputs Source Loop OUT D5-NETPage/Doorbell Audio and Trigger Input PG/DB Trig IR OUT/ALL IR OUTZone OUT Auxiliary Power Connector AUX Power OUTDHTP1 Speaker Connections DHTP1 RearUSB Port USB 16/2Local Sources Adding Zones System ExpansionDhsip Dhsip Front IR OUT# of Chassis Max # of Zones DH44 x DH44 x 1/DH46X x Adding Zones DH46X Digital Audio RouterExpansion OUT/EXPANSION Expansion OUT/EXPANSION Source Loop OUT/SOURCE Loop20 DX46X Zone OUT Connections Cat-5DIP Switch Settings Settings & OperationSource Input Gain Keypad Pairing Analog Source Input Gain Zone Pairing DIP Switches Zone PairingDHTP1 Amplified Touch Pad OperationAudio Symptom Possible Cause Solution TroubleshootingSymptom Possible Cause Solution 35Vrms / 4.8dBu Appendix a Specifications2V rms / 8.2dBu Page Limited Warranty Enrutador Digital de Audio De 4 Fuentes/4 Zonas Page Todos los derechos reservados Información de SeguridadTemperaturas y ambientes del funcionamiento Cuidado del DH44Precauciones Introducción ÍndiceSalida IR/SALIDA Todo IR «IR OUT/ALL IR OUT» Introducción Accesorios DH44 Aton CaracterísticasIndicador/Botón Función Definición de TérminosComunicación en el futuro Panel PosteriorDescripción Función NETTabla 1.2 Panel Posterior Preparación Diseño de Sistema Resumen/AplicacionesDH44 a «Touchpads» DHTP1 Pre-CableadoPre-Construcción Actualización de Cableado/Post-ConstrucciónSistema Básico de 4 Fuentes/4 Zonas UsosSistema Básico de 4 Fuentes/4 Zonas con Zonas Locales DH44 Enrutador Digital de Audio de 4 Fuentes/4 ZonasSistema Expandido de 4 Fuentes/8-28 Zonas Salida Análoga ConexionesEntradas de Fuentes de Audio Fuente de AudioDibujo 3.2 Salida de Fuente Coaxial Digital Entrada de D5-NET D5-NET Salidas de Bucle de Fuentes Source Loop OUTSalida de Expansión Expansion OUT Dibujo 3.5 Salidas de Expansión DH44 Enrutador Digital de Audio de 4 Fuentes/4 Zonas Salida de Zona «ZONE OUT» 3 4 5 6DHTP1 ¼ de pulgada OPT/COAX» en laDHTP1 Vista posteriorConexiones de Altavoces DHTP1 Agregando Zonas Fuentes Locales Expansión del SistemaEntrada de Fuente de Placa de Pared Dhsip DHTP1 Posterior Parte delantera de Dhsip Salida IR «IR OUT»# de Chasis Máximo # de Zonas DH44 x DH44 x 1/DH46X x Para Agregar Zonas Enrutador Digital de Audio DH46XChasis DH46X adicionales DHTP1 Vista Posterior Fuente Análoga de Ganancia de Entrada Ajustes y FuncionamientoAjustes de Interruptores DIP Fuente DE Ganacia DE Entrada Empajear LOS TecladosEmparejar Zonas Emparejadas No EmparejadasFuncionamiento Audio Síntoma Causa Posible Solución Problemas y SolucionesSíntoma Causa Posible Solución Page Garantía limitada