Tefal P4400631 manual To clean the lid seal, To clean the control module and valves

To clean the lid seal

	•After each use, always clean the
	seal (G) and its groove.
	•Wash the seal using a sponge ,
	warmwaterandwashing-upliquid.
	•To refit the seal, refer to Fig. 13
	and make sure that the words "
Never wash the seal	face côté couvercle " are against
in the dishwasher.	the lid.

To clean the control module and valves

•Remove the control module from the lid: see "Control module."

•Wash the module with washing-up liquid and then rinse under running water.

•Visually check that the steam release outlet (A) is not obstructed - Fig.14. If it is not, run it under water.

•Check that the operating valve (P) located inside the unit can move by moving the programme

selector to and pressing with your finger -

Fig. 15.

•You can clean this valve under running water. •Also check that the safety valve (Q) works by pressing hard with a cotton bud in the central part

of the valve, which should be moveable - Fig. 16. You can clean this valve under running water. •Check that the unit seal (O) is properly in place. If the seal is missing or damaged, leaks can occur in the unit when your pressure cooker is in use. The shape of the seal allows it to be removed and replaced easily. If necessary to replace, this part is available via our Customer Relations Helpline or on our website www.tefal.com

•Check the cleanliness of the pressure indicator (D), you can clean it under running water.

Never dismantle the control module

Do not forget to remove the timer.

Never put the control module in the dishwasher.

Do not use sharp or pointed objects when checking the safety valve (Q).

12