HP UX 11i v2 Networking Software manual Running Apri Tests Server Mode

Page 21

Interoperability Testing

Running APRI Tests (Server Mode)

Running APRI Tests (Server Mode)

If the remote is not capable of receiving connections, or you want to test the remote’s ability to establish connections, follow these instructions.

1.From root, type /opt/ots/bin/osidiag -w 300 (the -w 300 allows 300 seconds to get the client ready once the server is started), and select “ACSE/Presentation or ROSE Tests.”

2.Create a result file.

3.Select “Server...” from the Test Case menu.

4.For ROSE only: Enter the Presentation context identifiers to be used as ROSE contexts.

5.For ROSE only: Leave the autorespond to ROSE default set to “Y”.

6.Generate the connection from the client side via the remote application. Follow steps in the APRI Tests (Client Mode) if an HP system.

7.Check the “TEST STATUS” near the end of the report.

If the status is “PASSED,” you have successfully communicated with the remote node and are finished with this section.

If the status is “FAILED,” see “Interpreting APRI Errors” on page 22, and find the problem.

If you find the error, rerun the server test and rerun the client test on the remote to connect to this server.

If you cannot find the error, enable tracing on the local node. See “Tracing and Logging through /opt/ots/bin/osidiag” on page 62 for more information.

Chapter 1

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 32070-90031 E0597 HP 9000 NetworkingCopyright Notices Legal NoticesTrademark Notices Page Contents Problem Solving Syntax Example Recovering from otsstart Failure Using OSI and OTS ToolsUpdating OTS otsupdate Printing History Page Interoperability Testing Ftam Interoperability Testing Testing Ftam InteroperabilityFtam Pre-Test Checklist Ftam Pre-Test ChecklistCheck the following before attempting to run the Ftam tests Ftam Connectivity Test Ftam Interoperability TestingFtam File Transfer Test Ftam Call Errors Reason Corrective Action Interpreting Ftam ErrorsFtam Call Reason Corrective Action Testing Apri Interoperability Apri Pre-Test Checklist Apri Pretest ChecklistRunning Apri Tests Client Mode Running Apri Tests Server Mode Apri Call Errors Reason Corrective Action Interpreting Apri ErrorsApri Call Reason Corrective Action Testing Session Interoperability Session Pre-Test Checklist Session Pre-Test ChecklistRunning Session Tests Client Mode Running Session Tests Server Mode Session Call Errors Reason Corrective Action Interpreting Session ErrorsSession Call Reason Corrective Action Testing Transport Interoperability Transport Pre-Test Checklist Transport Pre-Test ChecklistRunning Transport Tests Transport problem corrected Interpreting Transport ErrorsProblem persists Transport Call Errors Reason ActionTesting LAN 802.3 or Fddi Interoperability LAN Pre-Test Checklist LAN Pre-Test ChecklistRunning LAN Tests LAN problem corrected Interpreting LAN ErrorsLAN Errors Reason Action Configuration change requiredError Reason Action Testing X.25 Interoperability Pre-Test Checklist Pre-Test ChecklistRunning X.25 Tests Interpreting X.25 Errors Problem correctedErrors Reason Action Recv*00B Protocol Reason Codes Reason and Refuse CodesCode Meaning Action 0x08 Reject Nsap unreachable/ Permanent Reason and Refuse Codes Local node may not be compatible with that Osiadmin F0-FF Session Refuse Codes Session Refuse CodesCode Meaning To Create a Result File Problem Solving Basic Steps Interpreting Errors Interpreting ErrorsWhere Action Status Check Checking System StatusStatus Check Link Verification Running Verification TestsOTS Transport Verification Service VerificationRunning Verification Tests Collecting Troubleshooting Data Troubleshooting MethodsType Troubleshooting Method Error Opt/ots/bin/osidiag Tracing and Logging throughService/Layer Entities to Log Tracing and Logging User ApplicationsLogging and Tracing Entities Fddi Common Configuration Mistakes Otsdests Common MistakesOtssubnets Common Mistakes Otsparms Common Mistakes Localapp Common MistakesRemoteapp Common Mistakes Error Description Common Logged ErrorsSubsystem OTS Subsystem AcsepresSubsystem Transport Subsystem Network Submitting Problem Information to HP Using OSI and OTS Tools Osiadmin RFC1006 Configure Managing Your Configuration Using osiconfTroubleshooting Using osiconfchk OSI Diagnostics Tests Provided by osidiagComponent Test Fddi Starting and Stopping OSI Osistart CommandStopping OSI Osistat CommandStarting OTS otsstart SyntaxExample Recovering from otsstart Failure Checking OTS Status otsstat OTS Updating OTS otsupdate End System Commands Dynamic Routing CommandsOtsaddis Intermediate System CommandsES/IS Parameters ES/IS Command ParametersArgument ParameterOption Description ES/IS Command OptionsDynamic Routing Commands Route CommandsDynamic Route Commands Route Command ParametersNsap Commands Route Command OptionsRoute Command Options Argument DescriptionOtsshownsaps Apri IndexIndex
Related manuals
Manual 175 pages 52.54 Kb Manual 74 pages 39 Kb Manual 236 pages 18.16 Kb Manual 12 pages 39.66 Kb Manual 28 pages 49.76 Kb
Top Page Image Contents