HP UX 11i v2 Networking Software manual Otsparms Common Mistakes, Localapp Common Mistakes

Page 66

Problem Solving

Common Configuration Mistakes

Incorrect interface name. Specifying an interface name that is not configured will result in warnings, but OTS will still start. If otsstat indicates any links are “NOT RUNNING,” verify these names.

ots_parms Common Mistakes

If close to the limit of connections available (448 over LAN, 4096 over X.25) through OTS, the ses_reuse_tp_con flag may hold open connections you need to recycle.

If using CONS/X.25, ensure that the Transport class OTS requests is acceptable to the remote. The tpcons_pref_mux_class parameter determines whether you use class 2 or 4. The parameter tpcons_tp0_only forces class 0.

Some vendors do not accept the OSI Transport protocol ID carried on X.25 connection requests. This can be disabled with tpcons_null_pid.

local_app Common Mistakes

Setting the maximum invocations, or inbound associations too low can result in your failing to receive or create connections with remote FTAM applications.

If you manually edit these files rather than using osiadmin, you should be sure that all FTAM application titles match the ftam_ddn_lookup_path parameter.

remote_app Common Mistakes

Mistyping a remote application title or alias for FTAM will result in your connection failing.

Mistyping a remote presentation address for FTAM will result in your connection failing.

66

Chapter 2

Image 66
Contents HP 9000 Networking 32070-90031 E0597Legal Notices Copyright NoticesTrademark Notices Page Contents Problem Solving Using OSI and OTS Tools Syntax Example Recovering from otsstart FailureUpdating OTS otsupdate Printing History Page Interoperability Testing Testing Ftam Interoperability Ftam Interoperability TestingFtam Pre-Test Checklist Ftam Pre-Test ChecklistCheck the following before attempting to run the Ftam tests Ftam Interoperability Testing Ftam Connectivity TestFtam File Transfer Test Interpreting Ftam Errors Ftam Call Errors Reason Corrective ActionFtam Call Reason Corrective Action Testing Apri Interoperability Apri Pretest Checklist Apri Pre-Test ChecklistRunning Apri Tests Client Mode Running Apri Tests Server Mode Interpreting Apri Errors Apri Call Errors Reason Corrective ActionApri Call Reason Corrective Action Testing Session Interoperability Session Pre-Test Checklist Session Pre-Test ChecklistRunning Session Tests Client Mode Running Session Tests Server Mode Interpreting Session Errors Session Call Errors Reason Corrective ActionSession Call Reason Corrective Action Testing Transport Interoperability Transport Pre-Test Checklist Transport Pre-Test ChecklistRunning Transport Tests Problem persists Interpreting Transport ErrorsTransport problem corrected Transport Call Errors Reason ActionTesting LAN 802.3 or Fddi Interoperability LAN Pre-Test Checklist LAN Pre-Test ChecklistRunning LAN Tests LAN Errors Reason Action Interpreting LAN ErrorsLAN problem corrected Configuration change requiredError Reason Action Testing X.25 Interoperability Pre-Test Checklist Pre-Test ChecklistRunning X.25 Tests Interpreting X.25 Errors Problem correctedErrors Reason Action Recv*00B Reason and Refuse Codes Protocol Reason CodesCode Meaning Action 0x08 Reject Nsap unreachable/ Permanent Reason and Refuse Codes Local node may not be compatible with that Osiadmin F0-FF Session Refuse Codes Session Refuse CodesCode Meaning To Create a Result File Problem Solving Basic Steps Interpreting Errors Interpreting ErrorsWhere Action Checking System Status Status CheckStatus Check Running Verification Tests Link VerificationService Verification OTS Transport VerificationRunning Verification Tests Collecting Troubleshooting Data Troubleshooting MethodsType Troubleshooting Method Error Tracing and Logging through Opt/ots/bin/osidiagService/Layer Entities to Log Tracing and Logging User ApplicationsLogging and Tracing Entities Fddi Common Configuration Mistakes Otsdests Common MistakesOtssubnets Common Mistakes Otsparms Common Mistakes Localapp Common MistakesRemoteapp Common Mistakes Subsystem OTS Common Logged ErrorsError Description Subsystem AcsepresSubsystem Transport Subsystem Network Submitting Problem Information to HP Using OSI and OTS Tools Osiadmin RFC1006 Configure Using osiconf Managing Your ConfigurationTroubleshooting Using osiconfchk OSI Diagnostics Tests Provided by osidiagComponent Test Fddi Osistart Command Starting and Stopping OSIOsistat Command Stopping OSIStarting OTS otsstart SyntaxExample Recovering from otsstart Failure Checking OTS Status otsstat OTS Updating OTS otsupdate Dynamic Routing Commands End System CommandsIntermediate System Commands OtsaddisArgument ES/IS Command ParametersES/IS Parameters ParameterES/IS Command Options Option DescriptionRoute Commands Dynamic Routing CommandsRoute Command Parameters Dynamic Route CommandsRoute Command Options Route Command OptionsNsap Commands Argument DescriptionOtsshownsaps Index ApriIndex
Related manuals
Manual 175 pages 52.54 Kb Manual 74 pages 39 Kb Manual 236 pages 18.16 Kb Manual 12 pages 39.66 Kb Manual 28 pages 49.76 Kb