HP UX 11i v2 Networking Software manual Error Reason Action

Page 38

Interoperability Testing

Interpreting LAN Errors

Error	Reason	Action

getmsg (DL_TEST_CON)	Receives information	Check MAC address
getmsg (DL_UNITDATA_ACK)	from the remote either on	speciﬁed, and cabling
	Receive or Test Frame	between the two systems.
	operation. Usually means	If neither is true, check to
	time out.	see if remote supports
		IEEE 802.3 TEST frames.

putmsg (DL_TEST_REQ)	The local system is not	Check and correct as
	conﬁgured to use IEEE	necessary using the
	packets.	lanconﬁg(1M) command.

putmsg (DL_UNITDATA_REQ)	Data exceeds maximum	Use “status” in LAN Test
	MTU size for LAN.	menu to determine MTU
		size.

38

Chapter 1

Image 38

Contents HP 9000 Networking 32070-90031 E0597Legal Notices Copyright NoticesTrademark Notices Page Contents Problem Solving Using OSI and OTS Tools Syntax Example Recovering from otsstart FailureUpdating OTS otsupdate Printing History Page Interoperability Testing Testing Ftam Interoperability Ftam Interoperability TestingCheck the following before attempting to run the Ftam tests Ftam Pre-Test ChecklistFtam Pre-Test Checklist Ftam Interoperability Testing Ftam Connectivity TestFtam File Transfer Test Interpreting Ftam Errors Ftam Call Errors Reason Corrective ActionFtam Call Reason Corrective Action Testing Apri Interoperability Apri Pretest Checklist Apri Pre-Test ChecklistRunning Apri Tests Client Mode Running Apri Tests Server Mode Interpreting Apri Errors Apri Call Errors Reason Corrective ActionApri Call Reason Corrective Action Testing Session Interoperability Session Pre-Test Checklist Session Pre-Test ChecklistRunning Session Tests Client Mode Running Session Tests Server Mode Interpreting Session Errors Session Call Errors Reason Corrective ActionSession Call Reason Corrective Action Testing Transport Interoperability Transport Pre-Test Checklist Transport Pre-Test ChecklistRunning Transport Tests Problem persists Interpreting Transport ErrorsTransport problem corrected Transport Call Errors Reason ActionTesting LAN 802.3 or Fddi Interoperability LAN Pre-Test Checklist LAN Pre-Test ChecklistRunning LAN Tests LAN Errors Reason Action Interpreting LAN ErrorsLAN problem corrected Conﬁguration change requiredError Reason Action Testing X.25 Interoperability Pre-Test Checklist Pre-Test ChecklistRunning X.25 Tests Errors Reason Action Interpreting X.25 ErrorsProblem corrected Recv*00B Reason and Refuse Codes Protocol Reason CodesCode Meaning Action 0x08 Reject Nsap unreachable/ Permanent Reason and Refuse Codes Local node may not be compatible with that Osiadmin F0-FF Code Meaning Session Refuse CodesSession Refuse Codes To Create a Result File Problem Solving Basic Steps Where Action Interpreting ErrorsInterpreting Errors Checking System Status Status CheckStatus Check Running Veriﬁcation Tests Link VeriﬁcationService Veriﬁcation OTS Transport VeriﬁcationRunning Veriﬁcation Tests Type Troubleshooting Method Error Collecting Troubleshooting DataTroubleshooting Methods Tracing and Logging through Opt/ots/bin/osidiagLogging and Tracing Entities Service/Layer Entities to LogTracing and Logging User Applications Fddi Otssubnets Common Mistakes Common Conﬁguration MistakesOtsdests Common Mistakes Remoteapp Common Mistakes Otsparms Common MistakesLocalapp Common Mistakes Subsystem OTS Common Logged ErrorsError Description Subsystem AcsepresSubsystem Transport Subsystem Network Submitting Problem Information to HP Using OSI and OTS Tools Osiadmin RFC1006 Conﬁgure Using osiconf Managing Your ConﬁgurationTroubleshooting Using osiconfchk Component Test OSI DiagnosticsTests Provided by osidiag Fddi Osistart Command Starting and Stopping OSIOsistat Command Stopping OSIExample Starting OTS otsstartSyntax Recovering from otsstart Failure Checking OTS Status otsstat OTS Updating OTS otsupdate Dynamic Routing Commands End System CommandsIntermediate System Commands OtsaddisArgument ES/IS Command ParametersES/IS Parameters ParameterES/IS Command Options Option DescriptionRoute Commands Dynamic Routing CommandsRoute Command Parameters Dynamic Route CommandsRoute Command Options Route Command OptionsNsap Commands Argument DescriptionOtsshownsaps Index ApriIndex

Related manuals

Manual 175 pages 52.54 Kb

Manual 74 pages 39 Kb

Manual 236 pages 18.16 Kb

Manual 12 pages 39.66 Kb

Manual 28 pages 49.76 Kb