HP UX 11i v2 Networking Software manual Interpreting Session Errors

Interoperability Testing

Interpreting Session Errors

Interpreting Session Errors

Table 1-3 describes possible errors and corrective actions. The list is sorted by the name of the function producing the error. The names are displayed by osidiag on the line immediately after the test status.

Table 1-3		Session Call Errors
	Session Call		Reason	Corrective Action
	osi_init()		Usually lack of available	Add swap space as necessary.
			swap space.
	osi_rgr_rq()		Possibly stack is not up.	Check to see if stack is up. See
	osi_rgr_cf()		Another application is	if another applications is
			already listening on this	using this address or has
			address or has requested	exclusive access.
			exclusive access to this
			address.
	osi_get_event()		Two common errors:	Verify that the remote is
			1. Time out - osidiag only	indeed performing its end of
				the dialog. If the timeout is
			waits 30 seconds by default.
				too short, it may be changed
			May indicate that the remote
				under the utilities menu. The
			is not sending any response
				name of the indication will be
			to your request.
				displayed immediately after
			2. Unanticipated primitive -	the call to
			osidiag received an	osi_get_event().
			indication that it did not
			expect.
	ses_pabort_id()		Used to decode an incoming	Check the reason code and
			provider abort indication.	correct accordingly.
			For more information see
			“Protocol Reason Codes” on
			page 44. The reason code
			appears in the middle of the
			osidiag output.

28 Chapter 1