|
| Interoperability Testing |
|
| Reason and Refuse Codes |
|
|
|
Code | Meaning | Action |
|
|
|
(0xE7) | Problem Accessing X.25 Subaddress of | Correct the routing table or |
| Remote | bring up the remote. |
| Subaddress portion of X.121 from the OTS |
|
| routing table is incorrect or the remote is not |
|
| up. |
|
|
|
|
(0xE8) | NSAP not Configured | Configure remote X.25 using |
| Network address portion of the address | osiadmin. |
|
| |
| specified is not configured in the routing |
|
| table. (Not usually LAN) |
|
|
|
|
(0xF0) | Protocol Error Detected by Remote’s | Generate a trace and contact |
| Transport | your HP support |
| Remote encountered an error decoding one o | representative. |
|
| |
| the Transport PDUs sent by us. |
|
|
|
|
(0xF1) | Protocol Error Detected by Remote’s Session | Generate a trace and contact |
| Remote encountered an error decoding one of | your HP support |
| representative. | |
| the Session PDUs sent by us. | |
|
| |
|
|
|
(0xF3) | Invalid Address or Permanent Transport | Use osiconf to associate |
| Error | X.121 address with NSAP. |
| Usually returned when an invalid T- selector |
|
| or Network Address is given. Could also get |
|
| when remote stack is not running or the |
|
| remote’s X.121 address is not associated with |
|
| its NSAP. |
|
|
|
|
(0xF4) | Invalid Address or Permanent Session Error | Check address specified, and |
|
| state of remote stack to |
|
| ensure it is running. |
|
|
|
(0xF6) | X.25 Unavailable or Transient Transport | Verify that X.25 is up by |
| Error | running x25stat operation. |
|
|
|
(0xF7) | Transient Session Error | Verify status of remote stack. |
|
|
|
Chapter 1 | 49 |