HP UX 11i v2 Networking Software manual Ots

Page 83

Using OSI and OTS Tools

Checking OTS Status: otsstat

Example 1

The following example shows the output of otsstat when OTS/9000 is running and can properly communicate with X.25 and with LAN. The programmatic access name for the X.25 card is telenet. The interface name for the LAN is lan0.

	/opt/ots/bin/otsstat
	OTS:	running
	lan0:	running
	telenet:	running
	The otsstat command does not include the status of the X.25 and LAN
NOTE
	network services. To check their status, use the x25stat and lanscan
	commands.

Example 2

The following example shows the output of otsstat when the OTS/9000 subsystem is not running:

/opt/ots/bin/otsstat

OTS: NOT RUNNING

Example 3

The following example shows the output of otsstat when OTS/9000 is running, cannot properly communicate with the X.25 link software, but can communicate with LAN.

/opt/ots/bin/otsstat

OTS: running

lan0: running

telenet: DOWN

Chapter 3

83

Image 83

Contents 32070-90031 E0597 HP 9000 NetworkingCopyright Notices Legal NoticesTrademark Notices Page Contents Problem Solving Syntax Example Recovering from otsstart Failure Using OSI and OTS ToolsUpdating OTS otsupdate Printing History Page Interoperability Testing Ftam Interoperability Testing Testing Ftam InteroperabilityCheck the following before attempting to run the Ftam tests Ftam Pre-Test ChecklistFtam Pre-Test Checklist Ftam Connectivity Test Ftam Interoperability TestingFtam File Transfer Test Ftam Call Errors Reason Corrective Action Interpreting Ftam ErrorsFtam Call Reason Corrective Action Testing Apri Interoperability Apri Pre-Test Checklist Apri Pretest ChecklistRunning Apri Tests Client Mode Running Apri Tests Server Mode Apri Call Errors Reason Corrective Action Interpreting Apri ErrorsApri Call Reason Corrective Action Testing Session Interoperability Session Pre-Test Checklist Session Pre-Test ChecklistRunning Session Tests Client Mode Running Session Tests Server Mode Session Call Errors Reason Corrective Action Interpreting Session ErrorsSession Call Reason Corrective Action Testing Transport Interoperability Transport Pre-Test Checklist Transport Pre-Test ChecklistRunning Transport Tests Transport Call Errors Reason Action Interpreting Transport ErrorsTransport problem corrected Problem persistsTesting LAN 802.3 or Fddi Interoperability LAN Pre-Test Checklist LAN Pre-Test ChecklistRunning LAN Tests Conﬁguration change required Interpreting LAN ErrorsLAN problem corrected LAN Errors Reason ActionError Reason Action Testing X.25 Interoperability Pre-Test Checklist Pre-Test ChecklistRunning X.25 Tests Errors Reason Action Interpreting X.25 ErrorsProblem corrected Recv*00B Protocol Reason Codes Reason and Refuse CodesCode Meaning Action 0x08 Reject Nsap unreachable/ Permanent Reason and Refuse Codes Local node may not be compatible with that Osiadmin F0-FF Code Meaning Session Refuse CodesSession Refuse Codes To Create a Result File Problem Solving Basic Steps Where Action Interpreting ErrorsInterpreting Errors Status Check Checking System StatusStatus Check Link Veriﬁcation Running Veriﬁcation TestsOTS Transport Veriﬁcation Service VeriﬁcationRunning Veriﬁcation Tests Type Troubleshooting Method Error Collecting Troubleshooting DataTroubleshooting Methods Opt/ots/bin/osidiag Tracing and Logging throughLogging and Tracing Entities Service/Layer Entities to LogTracing and Logging User Applications Fddi Otssubnets Common Mistakes Common Conﬁguration MistakesOtsdests Common Mistakes Remoteapp Common Mistakes Otsparms Common MistakesLocalapp Common Mistakes Subsystem Acsepres Common Logged ErrorsError Description Subsystem OTSSubsystem Transport Subsystem Network Submitting Problem Information to HP Using OSI and OTS Tools Osiadmin RFC1006 Conﬁgure Managing Your Conﬁguration Using osiconfTroubleshooting Using osiconfchk Component Test OSI DiagnosticsTests Provided by osidiag Fddi Starting and Stopping OSI Osistart CommandStopping OSI Osistat CommandExample Starting OTS otsstartSyntax Recovering from otsstart Failure Checking OTS Status otsstat OTS Updating OTS otsupdate End System Commands Dynamic Routing CommandsOtsaddis Intermediate System CommandsParameter ES/IS Command ParametersES/IS Parameters ArgumentOption Description ES/IS Command OptionsDynamic Routing Commands Route CommandsDynamic Route Commands Route Command ParametersArgument Description Route Command OptionsNsap Commands Route Command OptionsOtsshownsaps Apri IndexIndex

Related manuals

Manual 175 pages 52.54 Kb

Manual 74 pages 39 Kb

Manual 236 pages 18.16 Kb

Manual 12 pages 39.66 Kb

Manual 28 pages 49.76 Kb