HP UX 11i v2 Networking Software manual Running Session Tests Server Mode

Page 27

Interoperability Testing

Running Session Tests (Server Mode)

Running Session Tests (Server Mode)

If the remote is not capable of receiving connections, or you wish to test the remote’s ability to establish connections, follow these instructions.

1.From root, type /opt/ots/bin/osidiag -w 300 (the -w 300 allows 300 seconds to get the client ready once the server is started), and select “Session Tests”.

2.Create a result file.

3.Select “Server...” from the Test Case menu.

4.Generate the connection from the client side via the remote application. Follow steps in “Running APRI Tests (Client Mode)” on page 20, if an HP system.

5.Check the “TEST STATUS” near the end of the report. If the status is “PASSED,” you have successfully communicated with the remote node and are finished with this section.

If the staus is “FAILED,” see “Interpreting Session Errors” on page 28.

If you find the error, rerun the server test, then rerun the client test on remote to connect to this server.

If you cannot find the error, enable tracing on the local node. See “Tracing and Logging through /opt/ots/bin/osidiag” on page 62.

Chapter 1

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 32070-90031 E0597 HP 9000 NetworkingCopyright Notices Legal NoticesTrademark Notices Page Contents Problem Solving Syntax Example Recovering from otsstart Failure Using OSI and OTS ToolsUpdating OTS otsupdate Printing History Page Interoperability Testing Ftam Interoperability Testing Testing Ftam InteroperabilityFtam Pre-Test Checklist Ftam Pre-Test ChecklistCheck the following before attempting to run the Ftam tests Ftam Connectivity Test Ftam Interoperability TestingFtam File Transfer Test Ftam Call Errors Reason Corrective Action Interpreting Ftam ErrorsFtam Call Reason Corrective Action Testing Apri Interoperability Apri Pre-Test Checklist Apri Pretest ChecklistRunning Apri Tests Client Mode Running Apri Tests Server Mode Apri Call Errors Reason Corrective Action Interpreting Apri ErrorsApri Call Reason Corrective Action Testing Session Interoperability Session Pre-Test Checklist Session Pre-Test ChecklistRunning Session Tests Client Mode Running Session Tests Server Mode Session Call Errors Reason Corrective Action Interpreting Session ErrorsSession Call Reason Corrective Action Testing Transport Interoperability Transport Pre-Test Checklist Transport Pre-Test ChecklistRunning Transport Tests Transport Call Errors Reason Action Interpreting Transport ErrorsTransport problem corrected Problem persistsTesting LAN 802.3 or Fddi Interoperability LAN Pre-Test Checklist LAN Pre-Test ChecklistRunning LAN Tests Configuration change required Interpreting LAN ErrorsLAN problem corrected LAN Errors Reason ActionError Reason Action Testing X.25 Interoperability Pre-Test Checklist Pre-Test ChecklistRunning X.25 Tests Interpreting X.25 Errors Problem correctedErrors Reason Action Recv*00B Protocol Reason Codes Reason and Refuse CodesCode Meaning Action 0x08 Reject Nsap unreachable/ Permanent Reason and Refuse Codes Local node may not be compatible with that Osiadmin F0-FF Session Refuse Codes Session Refuse CodesCode Meaning To Create a Result File Problem Solving Basic Steps Interpreting Errors Interpreting ErrorsWhere Action Status Check Checking System StatusStatus Check Link Verification Running Verification TestsOTS Transport Verification Service VerificationRunning Verification Tests Collecting Troubleshooting Data Troubleshooting MethodsType Troubleshooting Method Error Opt/ots/bin/osidiag Tracing and Logging throughService/Layer Entities to Log Tracing and Logging User ApplicationsLogging and Tracing Entities Fddi Common Configuration Mistakes Otsdests Common MistakesOtssubnets Common Mistakes Otsparms Common Mistakes Localapp Common MistakesRemoteapp Common Mistakes Subsystem Acsepres Common Logged ErrorsError Description Subsystem OTSSubsystem Transport Subsystem Network Submitting Problem Information to HP Using OSI and OTS Tools Osiadmin RFC1006 Configure Managing Your Configuration Using osiconfTroubleshooting Using osiconfchk OSI Diagnostics Tests Provided by osidiagComponent Test Fddi Starting and Stopping OSI Osistart CommandStopping OSI Osistat CommandStarting OTS otsstart SyntaxExample Recovering from otsstart Failure Checking OTS Status otsstat OTS Updating OTS otsupdate End System Commands Dynamic Routing CommandsOtsaddis Intermediate System CommandsParameter ES/IS Command ParametersES/IS Parameters ArgumentOption Description ES/IS Command OptionsDynamic Routing Commands Route CommandsDynamic Route Commands Route Command ParametersArgument Description Route Command OptionsNsap Commands Route Command OptionsOtsshownsaps Apri IndexIndex
Related manuals
Manual 175 pages 52.54 Kb Manual 74 pages 39 Kb Manual 236 pages 18.16 Kb Manual 12 pages 39.66 Kb Manual 28 pages 49.76 Kb
Top Page Image Contents