HP UX 11i v2 Networking Software manual Dynamic Routing Commands, End System Commands

Using OSI and OTS Tools

Dynamic Routing Commands

Dynamic Routing Commands

Dynamic routing commands provide an alternative to using otsupdate. Use of these commands may be more efficient than using otsupdate when the information is small and restricted to routing information.

OTS routing information is contained in the Routing Information Base (RIB). The information contained in this database can be changed using a set of user commands.

Use these commands to:

•View the current RIB entries.

•Dynamically update the stack’s RIB.

•Make changes to the local configuration file. You can change or view routing information for:

•End Systems

•Intermediate Systems

•Routes

•NSAPs

End System Commands

End systems are nodes directly reachable from the local node.

otsaddes

ADD: Adds a single end system entry to the specified subnet. Now also supports per-destination protocol identifiers (PIDs).

otsaddes es_nsap subnet_name es_phys_addr [options]

[options]= -Ccug, -fF, -rR, -sS, -tT, -w, -xX

otsdeles

DELETE: Deletes the specified end system entry.

otsdeles es_nsap subnet_name [-w]

Chapter 3 85