HP UX 11i v2 Networking Software manual ES/IS Parameters, ES/IS Command Parameters, Argument

		Using OSI and OTS Tools
		Dynamic Routing Commands
	ES/IS Parameters
Table 3-3	ES/IS Command Parameters
Argument	ots_dests	Description
	Parameter
es_nsap	dest_net_address	Specifies the end system’s NSAP
is_nsap	dest_net_address	Specifies the intermediate system’s NSAP
subnet_name	dest_out_subnet	The symbolic name for the outgoing
		subnetwork to which this end system is
		attached. This name must have been
		previously configured before OTS startup.
es_phys_addr	dest_phys_address	The physical point of attachment to the
		subnetwork. This will be a X.121 address for
		X.25 or a MAC address for 802.3/FDDI
		subnets.
is_phys_addr	dest_phys_address	The physical point of attachment to the
		subnetwork. This will be a X.121 address for
		X.25 or a MAC address for 802.3/FDDI
		subnets.

Chapter 3 87