HP 8700 manual Change the print quality, Network settings, Select paper settings

Chapter 1

●SmartFocus: Turn on to focus images for clearer, sharper detail.

–On

–Off (default)

●Digital Flash: Turn on to improve photos with poor lighting and contrast.

–On

–Off (default)

●Change the print quality

–Normal

–Best (default)

Normal uses less ink than Best, and applies only to the current print job. The setting then automatically resets to Best.

●Print a sample page: Select to print a sample page useful for checking the print quality of the printer.

●Print a test page: Select to print a test page containing information about the printer that can help in troubleshooting problems.

●Network settings

–Display network IP address: Select to display the IP address of the printer.

–Print network settings page: Select to print a network configuration page that you can use for troubleshooting network connections or for the initial network setup.

–Reset network settings: Select to reset the network settings to the factory defaults.

–Reset Bluetooth settings: Select to reset the Bluetooth settings to the factory defaults.

●Clean the print cartridges: Select to clean the print cartridges. After the cleaning finishes, the printer prints a test page. You have the option to clean the cartridges again if the test page shows that they are still not clean.

●Calibrate the printer: Select to calibrate the printer.

●Select paper settings

–Auto-detect(default): Lets the printer auto-detect paper type and width.

–Manually set: Lets the user manually select paper type and width.

●Select language: Select to indicate the language you want used on the printer display.

●Reset all menu settings: Restores factory settings for all menu items except Select language.

8 HP Photosmart 8700 series