Regulatory statements
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name: | ||
Manufacturer's Address: | 11311 Chinden Boulevard | |
|
| Boise, Idaho |
declares, that the product |
| |
Product Name: |
| HP Color LaserJet 2500L, 2500, 2500n, 2500tn |
|
| Including: |
Model Number: |
| C9705A, C9706A, C9707A, C9708A |
|
| Including: C9698A, C9699A |
Product Options: |
| ALL |
conforms to the following Product Specifications: | ||
Safety: | IEC 60950:1991+A1+A2+A3+A4 / EN 60950:1992+A1+A2+A3+A4+A11 | |
| IEC | |
|
| |
EMC: | CISPR 22:1993+A1+A2 / EN 55022:1994+A1+A2 Class B1* | |
| EN | |
| EN |
EN 55024:1998
FCC Title 47 CFR, Part 15 Class B2 /
AS / NZS 3548:1995+A1+A2
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low
Voltage Directive 73/23/EEC, and carries the
1)The product was tested in a typical configuration with
2)This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
*This product includes LAN (Local Area Network) options. When the interface cable is attached to LAN connectors, the product meets the requirements of EN55022 Class A in which case the following applies: “Warning — This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.”
3)The model number may include an additional suffix letter “R”.
| Boise, Idaho USA |
| 6 June, 2002 |
For regulatory topics only: | |
Australia Contact: | Product Regulations Manager, |
| Street, Blackburn, Victoria 3130, Australia |
European Contact: | Your Local |
| GmbH, Department |
| |
USA Contact: | Product Regulations Manager, |
| Stop 160, Boise, ID |
120 Specifications and regulatory information | ENWW |