Printing on letterhead or preprinted forms
This section shows how to orient letterhead or preprinted forms when you are printing only on one side. For duplex
●Orient paper as shown below.
Orientation of letterhead in tray 1: side to be printed up, top edge in first.
Orientation of letterhead in tray 2 or optional tray 3: side to be printed down, top edge toward the front of the tray.
●Lower the rear output door if the paper is heavy to reduce curl.
●Avoid raised or embossed letterhead.
●Avoid letterhead that is printed with
●The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (195° C or 383° F for 0.1 second).
ENWW | Chapter 2 Printing tasks 47 |