HP 600n Print Server for Token Ring manual Configure the Card for Network Operation

Page 24

For persistent problems, refer to the troubleshooting sections in the HP JetDirect administrator’s guide supplied electronically on the HP JetDirect CD-ROM.

Step 6. Configure the Card for Network Operation

If the card has been successfully installed and is operating correctly, you are now ready to configure the card for network operation. You can configure the card using the following methods:

●Use the installation and configuration software on the

HP JetDirect CD-ROM. On Microsoft Windows 95/98/NT/2000 systems (Microsoft or Novell NetWare networks), the CD-ROM installation utility will guide you through the entire printer setup process.

●Use HP printer management software (such as HP Web JetAdmin) or other network utilities. HP printer management software can be downloaded from HP’s Customer Care Center (www.hp.com/support/net_printing). For additional information, see the HP JetDirect administrator’s guide supplied electronically on the CD-ROM.

●Use the printer’s control panel (for printers with a supported control panel) to configure basic network parameters on the card. See chapter 3 in this guide.

●Once the HP JetDirect card has been configured for TCP/IP operation, use a supported network browser to access the embedded web server on the HP JetDirect card. See chapter 4 in this guide.

●Once the HP JetDirect card has been configured for TCP/IP operation, use the Telnet services provided on the HP JetDirect card. See the HP JetDirect administrator’s guide supplied electronically on the CD-ROM.

2-10 Installing the Print Server

Image 24

Contents HP JetDirect 600N Hardware Installation Guide Page Hardware Installation Guide HP JetDirect 600N Print Server Publication number Quick Installation Identify Your HP JetDirect 600N Internal Print ServerHP J3110A for Ethernet 10Base-T networks HP J3112A for Token Ring Ieee 802.5 networksIf Necessary, Set Switches or Jumpers on Your Card Before Installing the Card, Verify That Your Printer WorksPrint a Printer Configuration If You Have a Token Ring CardTurn on the printer and print another configuration Verify That the Card Is Operating ProperlyConfigure the Card for Network Operation Table of Contents Using the Embedded Web Server Introduction Supported Network Protocols TCP/IPSupported Printers IntroductionIntroduction Installing the Print Server What You Need for Installation Identify Your HP JetDirect 600N Internal Print Server You can use only one Token Ring port RJ-45 or DB If Necessary, Set Switches or Jumpers on Your Card 10/100 Half/Full AutonegotiationBefore Installing the Card, Verify That Your Printer Works HP LaserJet Printers and MopiersService Config HP DesignJet PrintersTypical Card Installation and Network Connection Turn Off Your Printer and Insert the CardVerify That the Card Was Installed Correctly For HP J3113A 10/100Base-TX cards See For LocalTalk-Only Customers If you areConfigure the Card for Network Operation HP JetDirect Administrator’s Guide provided on Installing the Print Server Control Panel Configuration Introduction To Restore Configuration Default Values To Enable or Disable Network ProtocolsTo enable or disable network protocols Press Select. CFG NETWORK=YES* appearsConfiguring IPX Frame Types IPX Frame Types on an HP JetDirect Ethernet CardIPX Frame Types on an HP JetDirect Token Ring Card Frame Type DescriptionTo configure an IPX frame type CFG IPX/SPX=NO* is displayedConfiguring IPX Source Routing Token Ring Cards Only To configure IPX source routingSource Routing Description Press Item until SRC RC=Source Routing* appears Configuring TCP/IP Parameters Parameter DescriptionTo configure TCP/IP parameters CFG TCP/IP=NO* is displayed To configure EtherTalk parameters Press Item. Etalk PHASE=1* or Etalk PHASE=2* appearsCFG ETALK=NO* is displayed Control Panel Configuration Using the Embedded Web Server HP Web JetAdmin Compatibility Supported Web BrowsersViewing the Embedded Web Server Embedded Web ServerOperating Notes HP J3113A 10/100Base-TX Print Server Supported Links Link-Speed LEDsLED State Description Off Not linked Link Configuration Jumper Settings Jumper Setting DescriptionsJumper Location Link Troubleshooting Parameter Expected Messages for 10/100TX CardsHP J3113A 10/100Base-TX Print Server Specifications and Regulatory Statements HP JetDirect 600N Internal Print ServerElectrical EnvironmentalRegulatory Statements ElectromagneticFCC Statements Specifications Regulatory European CommunitySpecifications and Regulatory Statements Australia CanadaVcci Class a Japan RRL Statement Korea Taiwan Class a Chinese Safety Statement Page 5969-3561