3.Press [Item] until CFG NETWORK=NO* appears.
NO* indicates that access to the EIO JetDirect network menus will be bypassed. You must change this to CFG NETWORK=YES* to access the EIO JetDirect menus:
a.Press [Value]. CFG NETWORK=YES appears.
b.Press [Select]. CFG NETWORK=YES* appears.
4.Press [Item] to scroll through each network protocol until
CFG IPX/SPX=NO* is displayed.
To access the IPX/SPX configuration menu, press [Value] and then press [Select] to display CFG IPX/SPX=YES*.
5.Press [Item] until SRC RC=<Source Routing>* appears.
AUTO | ● To change the selection, press [Value] until the |
OFF | desired option appears, and then press [Select]. |
| |
SINGLE R | ● Press [Item] to continue to the next parameter. |
ALL RT |
|
|
|
Note:
An asterisk (*) indicates the active
6.To activate the printer and save your changes, press [Go].
3 Control Panel Configuration
Control Panel Configuration