HP 600n Print Server Ethernet/LocalTalk, 600n Print Server for Token Ring manual Operating Notes

Page 42

Operating Notes

Changes to the IP address and other parameters will close the connection to the embedded web server. To re-establish a connection, use the new IP address.

The HP JetDirect 600N print server supports the Internet Printing Protocol (IPP). For Windows NT 4.0 and 2000 systems, HP provides software (the HP Internet Printer Connection software) to configure the system for internet printing. To automatically install the software and set up your system for printing to this printer, click Internet Printing Install Wizard.

A link to HP’s web site is provided by clicking on the HP logo.

4-4 Using the Embedded Web Server

Image 42
Contents HP JetDirect 600N Hardware Installation Guide Page Hardware Installation Guide HP JetDirect 600N Print Server Publication number HP J3110A for Ethernet 10Base-T networks Quick InstallationIdentify Your HP JetDirect 600N Internal Print Server HP J3112A for Token Ring Ieee 802.5 networksPrint a Printer Configuration If Necessary, Set Switches or Jumpers on Your CardBefore Installing the Card, Verify That Your Printer Works If You Have a Token Ring CardTurn on the printer and print another configuration Verify That the Card Is Operating ProperlyConfigure the Card for Network Operation Table of Contents Using the Embedded Web Server Introduction Supported Network Protocols TCP/IPSupported Printers IntroductionIntroduction Installing the Print Server What You Need for Installation Identify Your HP JetDirect 600N Internal Print Server You can use only one Token Ring port RJ-45 or DB If Necessary, Set Switches or Jumpers on Your Card 10/100 Half/Full AutonegotiationBefore Installing the Card, Verify That Your Printer Works HP LaserJet Printers and MopiersService Config HP DesignJet PrintersTypical Card Installation and Network Connection Turn Off Your Printer and Insert the CardVerify That the Card Was Installed Correctly For HP J3113A 10/100Base-TX cards See For LocalTalk-Only Customers If you areConfigure the Card for Network Operation HP JetDirect Administrator’s Guide provided on Installing the Print Server Control Panel Configuration Introduction To Restore Configuration Default Values To Enable or Disable Network ProtocolsTo enable or disable network protocols Press Select. CFG NETWORK=YES* appearsIPX Frame Types on an HP JetDirect Token Ring Card Configuring IPX Frame TypesIPX Frame Types on an HP JetDirect Ethernet Card Frame Type DescriptionTo configure an IPX frame type CFG IPX/SPX=NO* is displayedConfiguring IPX Source Routing Token Ring Cards Only To configure IPX source routingSource Routing Description Press Item until SRC RC=Source Routing* appears Configuring TCP/IP Parameters Parameter DescriptionTo configure TCP/IP parameters CFG TCP/IP=NO* is displayed To configure EtherTalk parameters Press Item. Etalk PHASE=1* or Etalk PHASE=2* appearsCFG ETALK=NO* is displayed Control Panel Configuration Using the Embedded Web Server HP Web JetAdmin Compatibility Supported Web BrowsersViewing the Embedded Web Server Embedded Web ServerOperating Notes HP J3113A 10/100Base-TX Print Server Supported Links Link-Speed LEDsLED State Description Off Not linked Link Configuration Jumper Settings Jumper Setting DescriptionsJumper Location Link Troubleshooting Parameter Expected Messages for 10/100TX CardsHP J3113A 10/100Base-TX Print Server Electrical Specifications and Regulatory StatementsHP JetDirect 600N Internal Print Server EnvironmentalRegulatory Statements ElectromagneticFCC Statements Specifications Regulatory European CommunitySpecifications and Regulatory Statements Australia CanadaVcci Class a Japan RRL Statement Korea Taiwan Class a Chinese Safety Statement Page 5969-3561