HP sv6 manual Preparation for wide field displays, Tip

installation and user information

installation process

example, if you plan to add more hp visualization center sv6 systems or large display devices later, take those requirements into consideration.

2.Verify that you will have an ergonomically correct place to set up a monitor, keyboard and mouse. Optional: projector screens or other advanced displays.

3.Verify that delivery and moving arrangements have been made:

•size and weight restrictions are understood,

•safety precautions are understood,

•if anything other than a standard monitor will be used as an output display device, schedule an installer from your display vendor to be on-site the same day that your hp visualization center sv6 installer is there.

4.Have a hostname and IP address registered at your site for each workstation.You’ll also need an additional IP address for the Digi EtherLite-32 Terminal Server (DGZ1469C). For example, you would need 18 hostnames and IP addresses for a 16-pipe system.

5.Have a network connection available.

	preparation for wide field displays
	The preparation phase ensures that system specific requirements are
	addressed. hp visualization center sv6 systems minimally require one
	HP monitor. If wide field display options are ordered for projection
	systems, passive stereo or for multiple channel support, appropriate
	installation consulting should occur with the display vendor ahead of
	time.
	This guide does not cover how to integrate hp visualization center sv6
	with wide field displays, nor does HP’s installation service provide this.
	Have your display installer on-site at the same time as the hp
TIP
	visualization center sv6 installer is there. The display installer has the
	ultimate responsibility to make sure the displays are properly aligned
	and functioning.

Chapter 2 37