HP sv6 manual Verification, Example march gb patch OK OK

installation and user information

updating software

(Actions)

(Add Target Group)

name: /var/opt/ignite/sps/sv6files/sv6_targets [OK]

(Actions)

(Show Software For Selection) Source Host Name: svm

Source Depot Path: /var/opt/sps/depots [OK]

12. In the software selection window:

Left click to select PHNE_25612

Right click on PHNE_25612

(Mark For Install) (Actions)

(Install)

Assign an optional job title for monitoring and reference pur- poses.

Example: march gb patch [OK] [OK]

Watch the Job Browser and Job Results window for confirmation, warning, or error messages, which may need your response.

[Done]

step 4: verification

13.Check logs for errors.

Highlight the system with errors or warnings, then click [Show Log]. Copies of SD logs can be found at /var/adm/sw/*.log

14.If a pop-up window requests a mandatory reboot, click [Done]. By default, auto-reboot is disabled for the master node only, so the slaves will automatically reboot.

Reboot the master system: /sbin/reboot –q

15.Verify that the new software shows up in the software list. swlist grep PHNE_25612

The name and description should show up as output. Example: PHNE_25612 1.0 1000Base-SX/T B.11.00.[02-11] cumul. patch

54 Chapter 2