HP sv6 When installing patches that require a reboot, switch to a, Start install GUI swinstall

installation and user information updating software

(Actions)

(Add Targets)

Hostname: svm [Add]

Target Depot Path: /var/opt/sps/depots [OK] [OK]

(Actions)

(Show Software For Selection) Source Host Name: svm

Source Depot Path: /tmp/PHNE_25612.depot

9. In the software selection window:

Left click to select PHNE_25612

Right click on PHNE_25612

(Mark for copy) (Actions)

(Copy)

Assign an optional job title for monitoring and reference purposes.

Example: march gb

	[OK]
	Watch for warning or error messages that need to be resolved.
	(File)
	(Exit)
	step3: install
	When installing patches that require a reboot, switch to a
WARNING
	stand-alone workstation X server instantiation. If you wish to
	use the SD GUI tools instead of the command line or terminal
	versions, either login remotely to perform the install, or
	configure the X server to run as it would on a stand-alone
	workstation. (Example: Temporarily move the /etc/X11/X0screens
	file to X0screens.save then restart the X server.) Failure to do
	this could result in an incomplete installation. On sv6, when the
	first slave node reboots, it kills the X server on the master node,
	which kills the remaining swinstall GUI windows.
	10. Start install GUI: swinstall
	11. In the target selection screen:

Chapter 2 53