HP sv6 manual Uninstallation steps

			installation and user information
			updating software
4	Run install script	1.	init 2 to stop the X server
		2.	rlogin to the master system as root
		3.	Execute the install_sv6_enhancements script
5	Re-start X server	1. When complete, look for errors or warnings.
		2. init 3 or /tmp/startx0 to restart the X server
6	Check log files	1.	Check /tmp/sps/enhancements.log and
			/var/adm/sw/swinstall.log for errors.
		2.	A common error when installing with out the
			install_sv6_enhancements script is ‘cannot install from
			tape device’.
			To fix this, use:
			swcopy –s /tmp/tapedepot \
			–x enforce_dependencies=false\
			\* @ /tmp/diskdepot
			This will copy the software into a more accessible format.

WARNING	Uninstalling sv6_enhancements completely removes all X server and
	OpenGL software and may not roll back to the previous version.
	Reinstalling a new sv6_enhancements package or new X server and
	OpenGL patches is required.

uninstallation steps

1

swremove

As root, run: swremove

Add target group:

/var/opt/ignite/sps/sv6files/sv6_targets

Select: Actions, Show Software and Mark sv6_enhancements for removal

Select: Remove from the Actions menu Reboot as requested

Chapter 2 49