file configuration
#The form for each entry is:
#<internet address> <official hostname> <aliases>
#For example:
#192.1.2.34 hpfcrm loghost
#See the hosts(4) manual page for more information.
#Note: The entries cannot be preceded by a space.
#DNS Server (optional) |
| |
15.6.180.221 | dsnx.my.site | dsnx |
15.1.170.0 | myvis | #10/100 Ip8 hostname |
127.0.0.1 | localhost | loopback |
#sv6 10/100 LAN host information
#Automatically generated, customize for your site.
15.1.170.1 | sv1x | sv1x |
15.1.170.2 | sv2x | sv2x |
15.1.170.3 | sv3x | sv3x |
| . |
|
| . |
|
| . |
|
15.1.170.8 | sv8x | sv8x |
#sv6 Gigbit host information
# Do not change
192.168.1.1 svm
192.168.1.2 sv1
192.168.1.3 sv2
192.168.1.4 sv3
192.168.1.5 sv4
192.168.1.6 sv5
192.168.1.7 sv6
192.168.1.8 sv7
192.168.1.9 sv8
•/etc/rc.config.d/netconf - On all systems, the lan1 section specifies the IP address that corresponds with the HP ProCurve Gigabit Ethernet module (J4115B) that was assigned in the /etc/hosts file. The lan0 section and hostname specify the 10/100 LAN information.
#/etc/rc.config.d/netconf
# netconf: configuration values for core networking subsystems
HOSTNAME=”svm”
OPERATING_SYSTEM=HP-UX
LOOPBACK_ADRESS=127.0.0.1
Chapter 3 | 89 |