APC ACPA4000 manual Intake and Exhaust Vents, Hose connections, Assemble the ceiling adapter

Page 16

Intake and Exhaust Vents

Hose connections

The equipment requires the installation of intake and exhaust ducts for the condenser. See the drawing to identify the intake and exhaust sides of the equipment.

Building structural support

10-gauge (minimum) steel wire  Ceiling adapter

 Air deflector

Condenser exhaust duct

Condenser air intake duct

Assemble the ceiling adapter

Attach the air deflector to the exhaust side of the ceiling adapter using three M6 nuts.

Caution: The air deflector must face away from the air intake and obstructions such as walls or piping. Failure to position it in this way reduces cooling capacity and could cause alarms.

na0418a

na0147a

8	NetworkAIR ACPA4000

Image 16

Contents Installation, Operation, and Maintenance ACPA4000NetworkAIR Portable Air Conditioning Unit Page American Power Conversion Legal Disclaimer Page General Information InstallationContents Operation Maintenance and Troubleshooting Page General Information OverviewManual updates About the NetworkAIR ACPA4000Safety symbols that may be used in this manual Cross-referencesymbol used in this manualStoring the Equipment Before Installation Inspecting the EquipmentSafety Filing a claimInventory Tools RequiredThe equipment ships with the items shown below Front view Component IdentificationRear view Dimensions and Weights Dimensions are shown in mm inNet Weight Shipping WeightWhere to locate the equipment InstallationLock the rolling casters Hose connections Intake and Exhaust VentsAssemble the ceiling adapter Install the adapter in a drop ceiling NetworkAIR ACPA4000Assemble the ducts Connect the fitting to the drain line Drain LineAttach the drain line. Attach Accessories Temperature/humidity sensorOverview Relays and ContactsOutput relays To connect an output relay Input contactsTo connect an input contact Start-upchecklist Start-UpHow to apply power to the equipment Overview OperationDisplay interface identification Turn on the equipment How to Use the InterfaceScrolling status screens Main menu screen Navigating the interfaceDate 18-Jun-2007 Time Date 18-Jun-2007 TimePassword entry Change settingsTurn off the equipment Set Environmental Controls Default scheduleOperating schedules Schedule 1 ofSchedule On/Off ModeTemperature and humidity alarms Set Up AlarmsSet the alarm delay Set Up the Display Password and time-outSet the date and time Display interface optionsDevice settings Resetting to default settingsPath Main Menu Setup System Device Path Main Menu Setup Factory DefaultsHow to download firmware Set Up Contacts and Relays Input contactsUser input contacts User outputsChecking Equipment Status Default schedule statusScrolling status screens System and environmental status screensViewing alarm status Manufacturer dataResponding to Alarms Silencing the alarm beeperSilence Active Alarm Warning or alarm LEDAlarm and event log Active alarm screenResolving alarm conditions Alarm Message Alarm messagesAction Required Action Required Alarm MessageRemote temperature Display Interface Reference Charts SetupScrolling status screens Monitoring informationProgrammable settings SetupStatus Control EnvironmentSetup SystemMaintenance Maintenance and TroubleshootingReplace the air filter Clean the cabinet Clean the condenser filter and test the LCDI plugUpdate the main control board firmware Troubleshooting ProblemPossible cause Corrective actionOne-YearFactory Warranty Terms of warrantyNon-transferablewarranty ExclusionsWarranty claims Claims Warranty ProceduresParts Specifications ElectricalPhysical Component TypePage 990-0412D APC Worldwide Customer Support990-0412D 03/2008