APC ACPA4000 manual Maintenance and Troubleshooting, Replace the air filter

Page 44

Maintenance and Troubleshooting

Maintenance

Replace the air filter

Replace the air filter every 90 days or sooner if an alarm occurs. Keep the air filter clean to maximize the performance and life of the equipment.

Note: For maximum efficiency and to prevent equipment damage, always replace the filter with the size and type given below.

1.Slide the filter element out from the rear of the equipment.

2.Insert a new air filter (APC part number ACPA4000RF).

na0153a

36	NetworkAIR ACPA4000

Image 44

Contents NetworkAIR Portable Air Conditioning Unit ACPA4000Installation, Operation, and Maintenance Page American Power Conversion Legal Disclaimer Page Contents InstallationGeneral Information Operation Maintenance and Troubleshooting Page General Information OverviewManual updates About the NetworkAIR ACPA4000Safety symbols that may be used in this manual Cross-referencesymbol used in this manualStoring the Equipment Before Installation Inspecting the EquipmentSafety Filing a claimThe equipment ships with the items shown below Tools RequiredInventory Rear view Component IdentificationFront view Dimensions and Weights Dimensions are shown in mm inNet Weight Shipping WeightLock the rolling casters InstallationWhere to locate the equipment Assemble the ceiling adapter Intake and Exhaust VentsHose connections Install the adapter in a drop ceiling NetworkAIR ACPA4000Assemble the ducts Attach the drain line. Attach Drain LineConnect the fitting to the drain line Accessories Temperature/humidity sensorOutput relays Relays and ContactsOverview To connect an input contact Input contactsTo connect an output relay How to apply power to the equipment Start-UpStart-upchecklist Display interface identification OperationOverview Scrolling status screens How to Use the InterfaceTurn on the equipment Main menu screen Navigating the interfaceDate 18-Jun-2007 Time Date 18-Jun-2007 TimeTurn off the equipment Change settingsPassword entry Set Environmental Controls Default scheduleOperating schedules Schedule 1 ofSchedule On/Off ModeSet the alarm delay Set Up AlarmsTemperature and humidity alarms Set Up the Display Password and time-outSet the date and time Display interface optionsDevice settings Resetting to default settingsPath Main Menu Setup System Device Path Main Menu Setup Factory DefaultsHow to download firmware Set Up Contacts and Relays Input contactsUser input contacts User outputsChecking Equipment Status Default schedule statusScrolling status screens System and environmental status screensViewing alarm status Manufacturer dataResponding to Alarms Silencing the alarm beeperSilence Active Alarm Warning or alarm LEDResolving alarm conditions Active alarm screenAlarm and event log Action Required Alarm messagesAlarm Message Remote temperature Alarm MessageAction Required Display Interface Reference Charts SetupScrolling status screens Monitoring informationProgrammable settings SetupStatus Control EnvironmentSetup SystemReplace the air filter Maintenance and TroubleshootingMaintenance Update the main control board firmware Clean the condenser filter and test the LCDI plugClean the cabinet Troubleshooting ProblemPossible cause Corrective actionOne-YearFactory Warranty Terms of warrantyNon-transferablewarranty ExclusionsWarranty claims Parts Warranty ProceduresClaims Specifications ElectricalPhysical Component TypePage 990-0412D APC Worldwide Customer Support990-0412D 03/2008