APC ACPA4000 manual How to Use the Interface, Turn on the equipment, Scrolling status screens

Page 25

How to Use the Interface

How to Use the Interface

All settings are controlled through the display interface located on the front of the equipment.

Turn on the equipment

After you plug in the power cord, the equipment immediately begins operation based on its last programmed settings.

Note: The equipment waits three minutes before engaging the compressor if it has been unplugged or has been off for less than three minutes.

Scrolling status screens

After start-up, the interface displays a screen that shows the firmware revision number. The display interface then scrolls automatically and continuously through five screens of status information as shown.

System Status

Blower: High

System Status

Power: ON

Mode: Cool

Setpoint: 65 ° F

No Active Alarms
System Time:
Month-day year	Time

	Temp & Humidity
	Supply: 62 ° F
	Return: 76 ° F
	Remote: 75 ° F	13 %


	Default schedule
	is active		na1286a
	System Time:
	Month-day year	Time
	Month-day year	Time

Press the up or down arrow key to interrupt the automatic scrolling and view a specific status screen.

NetworkAIR ACPA4000

17

Image 25

Contents Installation, Operation, and Maintenance ACPA4000NetworkAIR Portable Air Conditioning Unit Page American Power Conversion Legal Disclaimer Page General Information InstallationContents Operation Maintenance and Troubleshooting Page Overview General InformationManual updates About the NetworkAIR ACPA4000Cross-referencesymbol used in this manual Safety symbols that may be used in this manualInspecting the Equipment Storing the Equipment Before InstallationSafety Filing a claimInventory Tools RequiredThe equipment ships with the items shown below Front view Component IdentificationRear view Dimensions are shown in mm in Dimensions and WeightsNet Weight Shipping WeightWhere to locate the equipment InstallationLock the rolling casters Hose connections Intake and Exhaust VentsAssemble the ceiling adapter NetworkAIR ACPA4000 Install the adapter in a drop ceilingAssemble the ducts Connect the fitting to the drain line Drain LineAttach the drain line. Attach Temperature/humidity sensor AccessoriesOverview Relays and ContactsOutput relays To connect an output relay Input contactsTo connect an input contact Start-upchecklist Start-UpHow to apply power to the equipment Overview OperationDisplay interface identification Turn on the equipment How to Use the InterfaceScrolling status screens Navigating the interface Main menu screenDate 18-Jun-2007 Time Date 18-Jun-2007 TimePassword entry Change settingsTurn off the equipment Default schedule Set Environmental ControlsSchedule 1 of Operating schedulesSchedule On/Off ModeTemperature and humidity alarms Set Up AlarmsSet the alarm delay Password and time-out Set Up the DisplaySet the date and time Display interface optionsResetting to default settings Device settingsPath Main Menu Setup System Device Path Main Menu Setup Factory DefaultsHow to download firmware Input contacts Set Up Contacts and RelaysUser input contacts User outputsDefault schedule status Checking Equipment StatusScrolling status screens System and environmental status screensManufacturer data Viewing alarm statusSilencing the alarm beeper Responding to AlarmsSilence Active Alarm Warning or alarm LEDAlarm and event log Active alarm screenResolving alarm conditions Alarm Message Alarm messagesAction Required Action Required Alarm MessageRemote temperature Setup Display Interface Reference ChartsScrolling status screens Monitoring informationSetup Programmable settingsStatus Control EnvironmentSystem SetupMaintenance Maintenance and TroubleshootingReplace the air filter Clean the cabinet Clean the condenser filter and test the LCDI plugUpdate the main control board firmware Problem TroubleshootingPossible cause Corrective actionTerms of warranty One-YearFactory WarrantyNon-transferablewarranty ExclusionsWarranty claims Claims Warranty ProceduresParts Electrical SpecificationsPhysical Component TypePage APC Worldwide Customer Support 990-0412D990-0412D 03/2008