APC ACPA4000 manual How to download firmware

Page 33
How to download firmware

How to download firmware

Path: Main Menu > Setup > Firmware Updates.

To download firmware:

1.Go to www.apc.com/tools/download/ and check for the most recent version of the firmware.

2.If a newer version is available, download it to a location that can be accessed in step 5.

3.Set up the serial connection:

a.Connect an available serial port of your computer to the serial port on the back of the unit using the supplied serial cable.

b.Run a terminal emulation program, such as Windows® HyperTerminal.

c.Configure the following settings on the serial port you will use:

Baud Rate

19200

Data Bits

8

Parity

None

Stop Bits

1

Flow Control

None

Note: Some terminal emulation programs require that you disconnect and then reconnect for the new serial port settings to take effect.

4.On the display interface, Select YES, Start download from the Firmware Updates option of the Setup menu.

5.In your terminal emulator, ensure that the connection is active (HyperTerminal displays a series of “C” characters), and send the file using the Xmodem protocol.

When the download is complete, the new version is displayed on the screen.

Note: The equipment shuts down during the firmware update process.

NetworkAIR ACPA4000

25

Image 33
Contents ACPA4000 Installation, Operation, and MaintenanceNetworkAIR Portable Air Conditioning Unit Page American Power Conversion Legal Disclaimer Page Installation General InformationContents Operation Maintenance and Troubleshooting Page Overview General InformationManual updates About the NetworkAIR ACPA4000Cross-referencesymbol used in this manual Safety symbols that may be used in this manualInspecting the Equipment Storing the Equipment Before InstallationSafety Filing a claimTools Required InventoryThe equipment ships with the items shown below Component Identification Front viewRear view Dimensions are shown in mm in Dimensions and WeightsNet Weight Shipping WeightInstallation Where to locate the equipmentLock the rolling casters Intake and Exhaust Vents Hose connectionsAssemble the ceiling adapter NetworkAIR ACPA4000 Install the adapter in a drop ceilingAssemble the ducts Drain Line Connect the fitting to the drain lineAttach the drain line. Attach Temperature/humidity sensor AccessoriesRelays and Contacts OverviewOutput relays Input contacts To connect an output relayTo connect an input contact Start-Up Start-upchecklistHow to apply power to the equipment Operation OverviewDisplay interface identification How to Use the Interface Turn on the equipmentScrolling status screens Navigating the interface Main menu screenDate 18-Jun-2007 Time Date 18-Jun-2007 TimeChange settings Password entryTurn off the equipment Default schedule Set Environmental ControlsSchedule 1 of Operating schedulesSchedule On/Off ModeSet Up Alarms Temperature and humidity alarmsSet the alarm delay Password and time-out Set Up the DisplaySet the date and time Display interface optionsResetting to default settings Device settingsPath Main Menu Setup System Device Path Main Menu Setup Factory DefaultsHow to download firmware Input contacts Set Up Contacts and RelaysUser input contacts User outputsDefault schedule status Checking Equipment StatusScrolling status screens System and environmental status screensManufacturer data Viewing alarm statusSilencing the alarm beeper Responding to AlarmsSilence Active Alarm Warning or alarm LEDActive alarm screen Alarm and event logResolving alarm conditions Alarm messages Alarm MessageAction Required Alarm Message Action RequiredRemote temperature Setup Display Interface Reference ChartsScrolling status screens Monitoring informationSetup Programmable settingsStatus Control EnvironmentSystem SetupMaintenance and Troubleshooting MaintenanceReplace the air filter Clean the condenser filter and test the LCDI plug Clean the cabinetUpdate the main control board firmware Problem TroubleshootingPossible cause Corrective actionTerms of warranty One-YearFactory WarrantyNon-transferablewarranty ExclusionsWarranty claims Warranty Procedures ClaimsParts Electrical SpecificationsPhysical Component TypePage APC Worldwide Customer Support 990-0412D990-0412D 03/2008