Hunter Fan R410A manual Function setting method, When Function is selected

- 38 -

AUTO RUN SET

Function description:

Function number: A

B

(b) Function setting method

1) Stop the air conditioner		Operating guide message
		Function description: B , Settting: C	Function number: A
2) Press the SET and MODE buttons simultaneously
for 3 seconds or longer.
The screen display will be switched as follows:			Confirm Button
“	SELECT ITEM”	AUTO RUN SET
“	SET"
			ON/OFF Button
“FUNCTION SET ”

FUNCTION SET		Start Button
3) Press the SET button.	Selector button
The unit will enter the function setting mode. The
screen display will charge to “ FUNCTION	Indoor unit selector button	Previous screen button
”.

4)Check which category your desired setting belongs to, “ FUNCTION (Remote controller unit function)” or “I/U FUNCTION " (Indoor unit function).

5)Press either or button.

Select either “ FUNCTION ” or “I/U FUNCTION ”.

FUNCTION I/U FUNCTION

6) Press the SET button.

When “ FUNCTION ” is selected.

1“DATA LOADING” (blinking) “ FUNCTION” “GRILLE SET” (Function number: A, Function description: B) The screen display will be switched like this.

2Press either or button.

“Function number: A, Function description: B “from the list of remote controller unit functions will be displayed one by one. Select a desired function.

3Press the SET button.

The screen display will be switched as follows:

“ SETTING” “Setting: C” (ex. “AUTO RUN ON”)

4Press either or button.

A list of “Settings: C” will be displayed one by one. Select your desired setting.

5 Press the SET button.

The selected setting is displayed

for 2 seconds, then followed by “SET COMPLETE” and the function setting process is com- pleted.

Then the screen display will be

* When “ AUTO RUN SET ” is selected.

swiched to “Function number:	AUTO RUN ON	Setting: C
A, Function description: B,” so
if you want to comtinue to set	AUTO RUN ON	AUTO RUN OFF
another function, repeat the steps
as explained above.
To finish the function setting pro-		SET COMPLETE
cess, please proceed to Step (c).