(c) Wireless remote controller
OPERATION MODE indicator
Indicates selected operation mode
Fan speed
Indicates the selected fan speed
Auto swing
Indicates the selection of swing louver.
Timer ON time
Indicates the timer ON time.
When the timer mode is “CONT” or “OFF”, the present time is indicated.
OPERATION MODE select button
This button, whenever pressed, changes the mode in the following order.
AUTO ➞ COOL ➞ DRY
HEAT ➞FAN
FAN SPEED button
Every time when the button is pressed, the mode is sequentially changed HI →LOW.
Air flow direction button
Used to start or stop the swing louver.
Timer mode button
Every time when the button is pressed, the mode is sequentially changed CONT → ON
→OFF → PROGRAM.
Reset switch
Used to reset the microcomputer when some- thing is wrong on the remote controller dis- play.
•Above figure shows all indications for the purpose of explanation, but practically only the pertinent parts are indicated.
AUTO COOL DRY FAN HEAT FILTER
FAN HI ME LO
°C
ON AMPM 
OFF AMPM 
MODE TEMP ON/OFF
FAN SPEED | AIR FLOW | FILTER |
TIMER | SET |
|
ACL |
| TIME |
Signal sender
Signals are sent to the air conditioner from here.
Filter reset indicator
The FILTER mark is indicated when the FILTER RESET button is pressed.
Temperature indicator
Set temperature is indicated.
Timer OFF time
Indicated the timer OFF time.
When the timer mode is “CONT” or “OFF”, there is no indication.
ON/OFF button
When the button is pressed, the air conditioner is started, and when the button is pressed once again, it is stopped. (When the air conditioner is stopped, the present time only is indicated. When the air conditioner is operating, details of setting are indicated.)
ROOM TEMP. button
Room temperature is set within the range of
∇or button.
Filter button
Used to reset (turn off) the filter sign. (Press for more than 1 second.)
Press the button only after completing the filter cleaning.
TIME button
Used to set the present time and the timer operation time.
Set button
Used to switch from the hour to minute or vice versa when setting the present time or timer operation time.
Clock switch
Press this before setting the present time.
- 44 -