Home Automation HOME AUTOMATION, INC. Omni IIe House Codes 1-4All On, Time Clocks, Page

Page 82

House Codes 1-4 All On

This feature allows you to choose if House Code 1-4 will respond to the “All On” command. Press the 0 key to select No and the 1 key to select Yes. After selecting, press the down-arrow key to change this option for the next House Code.

HC 1	ALL ON:	1
0=NO	1=YES

The default setting for HC 1-4 All On is Yes.

Notes:

1.When configured, each House Code will affect 2 rooms of HLC lighting (i.e. HC 1 ALL ON affects Room 1 and 2).

2.When the House Code is configured as UPB, RadioRA, or CentraLite, “House Code All On” does not affect the state of the installed devices; however, if this setup item is set to “Yes”, Omni IIe will change the status of all units on that House Code to “On” (even though it doesn’t explicitly send an All On command to those units). If the “House Code All On” setup item is set to “No”, Omni IIe will not change the status of units on that House Code.

Time Clocks

There are three Time Clocks in the system are used to conditionalize programs. They are used solely to define time periods during the week when certain programs should be enabled or disabled to execute.

TIME CLOCK 1 ON

TIME CLOCK 1 OFF

Specify the on and off times for each Time Clock - See Set Up Codes.

TIME CLOCK 1 ON TIME: 12:00 AM MTWTFSS #=CHNG

TIME CLOCK 1 OFF TIME

--NEVER #=CHNG

For example, it may be desirable to conditionalize certain programs to execute only during a normal Monday - Friday 9:00 AM - 5:00 PM work week.

The default for Time Clock 1 ON is 12:00 AM MTWTFSS, and the default for Time Clock 1 OFF is Never, so that Time Clock 1 is always Enabled.

TIME CLOCK 2 ON

TIME CLOCK 2 OFF

TIME CLOCK 3 ON

TIME CLOCK 3 OFF

Time Clocks 2 and 3 is entered into the system and set for time and dates exactly like the settings for Time Clock 1.

Page 74

Image 82

Contents HOME AUTOMATION, INC Document Number 20R00-50Rev. JanuaryCopyright 2001-2006Home Automation, Inc All Rights ReservedSECURITY SYSTEM OPERATION INTRODUCTIONOVERALL DESCRIPTION ContentsCONTROL PC Access TELEPHONE CONTROLSETUP CANADIAN INDUSTRY CANADA NOTICE UNDERWRITERS LABORATORIES REQUIREMENTSFEDERAL COMMUNICATION COMMISSION NOTICE APPENDIX A - DIAL OUT PLANNERPage Underwriters Laboratories UL Listing INTRODUCTIONPage 1- OFF OVERALL DESCRIPTIONConsole Operation 2- DAY6- UP ARROW Normal Top-LevelDisplayDisplay Menus 7- CONSOLE LEDTrouble Beeps Error BeepsMain Menu To silence the beeper, press the * keyAreas Omni IIe MaintenanceCancel Confirmation Beep0 = OFF SECURITY SYSTEM OPERATIONArming the Security System 1 = DAY3 = AWAY Using Shortcut Keys2 = NIGHT 4 = VACATIONBypassing Zones 9 = RESTOREQuick Arm Restoring ZonesBurglar Alarm Activated What To Do When You Come HomeWhat Happens When the Alarm is Activated #=GOTOEmergency Keys Fire Alarm ActivatedGas Alarm Activated PageAlarm Cancel Duress Code Entered or Duress Alarm ActivatedAlarm Reset Police EmergencyMaster Code Trouble IndicationsCodes PageArea Arming Panic SwitchesDuress Code Manager CodeGOTO Area PageTesting Your System PageAbout UPB Control CommandsCONTROL PageHAI Lighting Control HLC Format When set to UPB, the Omni IIe controller canRoom Controller LED Indicators About RoomsAbout CentraLite About Lutron RadioRAAbout House Controllers PageAbout When set to RadioRA, the Omni IIe controller canAbout ALC House CodesControlling Units Unit NumbersScrolling Through Names Omni IIe Unit NumbersOperation Configuring Lighting Scenes in an HLC RoomStep Controlling CentraLite Units PageControlling ALC or X-10Units Controlling RadioRA UnitsPage Controlling Compose Units Ramp Command ALCPage Status of a Unit Timed CommandsScene Command Compose Internal FlagsWHEN ALL ON LINK 50 ON WHEN ALL OFF LINK 50 OFF Controlling OutputsAll On / Off WHEN ALL ON PHANTOM BUTTON 16 ONLeviton Scene Control All Lights OnAll Off SceneScene On Command Scene CommandsScene Set Command Scene Off CommandExecuting Phantom Buttons Setting a Link Lighting ScenesActivating and Deactivating Links Executing CentraLite ScenesLeave for Work Button ButtonsTemperature Control Dinner for Two ButtonHAI RC-SeriesThermostats PageProgrammable Energy Saver Modules PESMs PageThe following control actions are allowed on PESMs PageIndoor and Outdoor Temperature Freeze AlarmsIMPORTANT NOTES PageTemperature Control of Appliances Temperature AlarmsHumidity PageStatus Configuring HLC DevicesConfiguring HLC Devices using an Omni Console PageStep Operation Setup Mode for HLC DevicesStep Operation Step OperationRING - RINGING ONHK - ON HOOKOFFHK - OFF HOOK DEAD - DEAD PHONE LINEEvent Log Show Events PageShow Message MessagesPage Say Message Log MessageClear Message Phone MessageENTER MESSAGE MSGNAMEPage In-HousePhones TELEPHONE CONTROLTelephone Interface Remote PhonesMain Menu Phone Access Denied - Remote LockoutAlternate Method Page3 - Button 1 - Control2 - Security 4 - All6 - Status When an HAI Communicating Thermostat is enteredWhen a Programmable Energy Saver PESM is entered 7 - Events9 - Good-Bye When the HAI Two-WayAudio Module is being used8 - Phone Panic Button over the Phone # # # # # #Voice Dialer Emergency Dial-OutDigital Dialer How the Omni IIe Voice Dialer WorksEntering the Code What the Omni IIe Voice Dialer DoesWhat You Hear - If Your Omni IIe Calls You PageBuilt-InEthernet Port PC AccessConnecting to Network via PC Access Omni IIe Ethernet Connections192.168.0.101 Hub or HAI Omni IIeRouter Local NetworkDynamic DNS Controlleri.e Local / Wide Area Networki.e PageAccess Areas SETUPSet Up Codes Authority LevelTIME Set Up TimeDuress Code Page2 = Show Programs Advanced Control Programming ACP1 = Add Programs PageMenu Page3 = Delete All Programs Edit ProgramsPage Times Programs Edit Programs WhenPage Button and Event Programs Control Unit / Switch Press Event ButtonsPage Omni IIe Corresponding Switch TableSwitch UPB 6-ButtonKeypadAll On/Off Event Buttons Zone Event ButtonsPage X-10Event Buttons Alarm Event ButtonsUPB Link Event Buttons PageMessage Event Buttons Pro-Link Miscellaneous Event ButtonsPage Program Control Commands Edit Program CommandSwitch Press Event Buttons CentraLite PageWHEN U1 SW UNIT 1 LED 3 ON Unit Toggle CommandProgram Security Commands WHEN LINK 1 ON Porch Light STATUSProgram Video Commands Program Button CommandsProgram All On / All Off Commands Program Temperature CommandsProgram Control Conditions Program Message CommandsEdit Program Condition PageProgram Time Clock Conditions Program Security Mode ConditionsProgram Zone Conditions Program Other ConditionsSELECT CONDITION NEVER PageRemote Commands Set Up DialTelephone Access Answer Outside CallDial Order Dial Out NumberDial Out Numbers PageExit Delay Set Up ArmingEntry Delay Audible Exit DelayEnable Auto Bypass Set up MiscellaneousEnable Quick Arm All On For AlarmHouse Codes 1-4Format Enable Freeze AlarmFlash For Alarm FORMATTime Clocks House Codes 1-4All OnPage Daylight Savings Latitude, Longitude, and Time ZoneZONE NAME PageNUMBER Controller IP AddressController Port Number DESCRIPTIONEncryption Key Set Up NamesPage SET UP VOICE 1=CTRL 2=ZONE 3=BTTN ↓ Set Up VoiceSet Up Address 4=CODE 5=TEMP 6=AREA 8=MSG↑FIRE ESCAPE PLANNING UNDERWRITERS LABORATORIES REQUIREMENTSPage FEDERAL COMMUNICATION COMMISSION NOTICE PageIF YOU HAVE TROUBLE WITH YOUR PHONES CANADIAN INDUSTRY CANADA NOTICEPage Omni IIe Voice Dial-OutPlanner APPENDIX A - DIAL OUT PLANNERPage INSTRUCTIONS TO CALLED PARTY PageCODE CHAR APPENDIX B - TEXT DESCRIPTION CHARACTER CODESCODE CHAR CODE CHARDESCRIPTION APPENDIX C - VOICE DESCRIPTION CODESCODE CODECODE CODEDESCRIPTION DESCRIPTIONCODE CODEDESCRIPTION DESCRIPTIONCODE DESCRIPTION CODE DESCRIPTIONCODE DESCRIPTION PagePage NOTE TO INSTALLER HAI New Orleans, LA U S A