Home Automation INC. Omni IIe, HOME AUTOMATION Edit Programs When, Times Programs, Page

Page 65

Edit Programs When

Selecting the 1 (WHEN) key, from the Edit Program menu, allows the time or button/event that activates the program to be changed. The display shows:

EDIT WHEN 1=TIMED 2=BUTTON

Times Programs

Selecting 1 (TIMED) sets the program to be activated at a specific time of day. You are prompted to enter the time and date or days of week. The current default value is shown for each item. Press ' # ' to accept the default.

12:00 AM 5/17 1=TIME 2=DATE/DAY

Select 1 (TIME) to enter the new time. If the desired time is the time in which sunrise or sunset will occur, press the up arrow key for sunrise, or the down arrow key for sunset before entering a time.

TIME: 12:00 AM

HHMM ↑=RISE/AM ↓=SET/PM

You may also choose to have the program execute up to 120 minutes before or after the time of sunrise or sunset.

SUNSET

1=BEFORE 2=AFTER #=AT

If the 1(BEFORE) or 2(AFTER) key is selected, you will be prompted to select the amount of minutes:

ENTER OFFSET: 0-120 MINUTES

When entering a time of day, AM/PM must be specified for the time if the AM/PM format is being used. Otherwise the entered time should be 13:00-23:59.

TIME: 8:00 AM

HHMM ↑=RISE/AM ↓=SET/PM

Select 2 (DATE/DAY) to enter a new date or days of week.

DATE: 10/15

MMDD ↓=DAY

Next, specify if the program will run once (on the specified date and then be deleted) or if the program will run every year on the specified date (yearly).

RUN PROGRAM 1=ONCE 2=YEARLY

To change days, press the down arrow (DAY) key. You will be prompted to enter the day(s) that the program will be activated. Press 1-7 for Monday - Sunday, 0 for Once, 8 for Weekdays, and 9 for Weekends, then ' # '.

DAY(S): M-W-F--

1-7=MON-SUN 0=ONCE

Press the ' # ' key and the display will then return to the Edit Program menu:

EDIT PROGRAM

1=WHEN 2=CMD 3=&COND

Page 57

Image 65

Contents Document Number 20R00-50Rev. January HOME AUTOMATION, INCAll Rights Reserved Copyright 2001-2006Home Automation, IncOVERALL DESCRIPTION INTRODUCTIONSECURITY SYSTEM OPERATION ContentsCONTROL TELEPHONE CONTROL PC AccessSETUP FEDERAL COMMUNICATION COMMISSION NOTICE UNDERWRITERS LABORATORIES REQUIREMENTSCANADIAN INDUSTRY CANADA NOTICE APPENDIX A - DIAL OUT PLANNERPage Page INTRODUCTIONUnderwriters Laboratories UL Listing Console Operation OVERALL DESCRIPTION1- OFF 2- DAYDisplay Menus Normal Top-LevelDisplay6- UP ARROW 7- CONSOLE LEDMain Menu Error BeepsTrouble Beeps To silence the beeper, press the * keyCancel Omni IIe MaintenanceAreas Confirmation BeepArming the Security System SECURITY SYSTEM OPERATION0 = OFF 1 = DAY2 = NIGHT Using Shortcut Keys3 = AWAY 4 = VACATIONQuick Arm 9 = RESTOREBypassing Zones Restoring ZonesWhat Happens When the Alarm is Activated What To Do When You Come HomeBurglar Alarm Activated #=GOTOGas Alarm Activated Fire Alarm ActivatedEmergency Keys PageAlarm Reset Duress Code Entered or Duress Alarm ActivatedAlarm Cancel Police EmergencyCodes Trouble IndicationsMaster Code PageDuress Code Panic SwitchesArea Arming Manager CodePage GOTO AreaPage Testing Your SystemCONTROL Control CommandsAbout UPB PageRoom Controller LED Indicators When set to UPB, the Omni IIe controller canHAI Lighting Control HLC Format About RoomsAbout House Controllers About Lutron RadioRAAbout CentraLite PageAbout ALC When set to RadioRA, the Omni IIe controller canAbout House CodesScrolling Through Names Unit NumbersControlling Units Omni IIe Unit NumbersStep Configuring Lighting Scenes in an HLC RoomOperation Controlling CentraLite Units PagePage Controlling RadioRA UnitsControlling ALC or X-10Units Page Ramp Command ALCControlling Compose Units Scene Command Compose Timed CommandsStatus of a Unit Internal FlagsAll On / Off Controlling OutputsWHEN ALL ON LINK 50 ON WHEN ALL OFF LINK 50 OFF WHEN ALL ON PHANTOM BUTTON 16 ONAll Off All Lights OnLeviton Scene Control SceneScene Set Command Scene CommandsScene On Command Scene Off CommandActivating and Deactivating Links Setting a Link Lighting ScenesExecuting Phantom Buttons Executing CentraLite ScenesTemperature Control ButtonsLeave for Work Button Dinner for Two ButtonPage HAI RC-SeriesThermostatsPage Programmable Energy Saver Modules PESMsPage The following control actions are allowed on PESMsIMPORTANT NOTES Freeze AlarmsIndoor and Outdoor Temperature PageHumidity Temperature AlarmsTemperature Control of Appliances PageConfiguring HLC Devices using an Omni Console Configuring HLC DevicesStatus PageStep Operation Setup Mode for HLC DevicesStep Operation Step OperationOFFHK - OFF HOOK ONHK - ON HOOKRING - RINGING DEAD - DEAD PHONE LINEShow Events Page Event LogPage MessagesShow Message Clear Message Log MessageSay Message Phone MessagePage MSGNAMEENTER MESSAGE Telephone Interface TELEPHONE CONTROLIn-HousePhones Remote PhonesAlternate Method Phone Access Denied - Remote LockoutMain Menu Page2 - Security 1 - Control3 - Button 4 - AllWhen a Programmable Energy Saver PESM is entered When an HAI Communicating Thermostat is entered6 - Status 7 - Events8 - Phone When the HAI Two-WayAudio Module is being used9 - Good-Bye Panic Button over the Phone # # # # # #Digital Dialer Emergency Dial-OutVoice Dialer How the Omni IIe Voice Dialer WorksWhat You Hear - If Your Omni IIe Calls You What the Omni IIe Voice Dialer DoesEntering the Code PageConnecting to Network via PC Access PC AccessBuilt-InEthernet Port Omni IIe Ethernet ConnectionsDynamic DNS Local Network192.168.0.101 Hub or HAI Omni IIeRouter Controlleri.e Local / Wide Area Networki.e PageSet Up Codes SETUPAccess Areas Authority LevelDuress Code Set Up TimeTIME Page1 = Add Programs Advanced Control Programming ACP2 = Show Programs PagePage MenuPage Edit Programs3 = Delete All Programs Page Edit Programs WhenTimes Programs Page Control Unit / Switch Press Event ButtonsButton and Event Programs Switch Corresponding Switch TableOmni IIe UPB 6-ButtonKeypadPage Zone Event ButtonsAll On/Off Event Buttons UPB Link Event Buttons Alarm Event ButtonsX-10Event Buttons PagePage Miscellaneous Event ButtonsMessage Event Buttons Pro-Link Switch Press Event Buttons CentraLite Edit Program CommandProgram Control Commands PageProgram Security Commands Unit Toggle CommandWHEN U1 SW UNIT 1 LED 3 ON WHEN LINK 1 ON Porch Light STATUSProgram All On / All Off Commands Program Button CommandsProgram Video Commands Program Temperature CommandsEdit Program Condition Program Message CommandsProgram Control Conditions PageProgram Zone Conditions Program Security Mode ConditionsProgram Time Clock Conditions Program Other ConditionsPage SELECT CONDITION NEVERTelephone Access Set Up DialRemote Commands Answer Outside CallDial Out Numbers Dial Out NumberDial Order PageEntry Delay Set Up ArmingExit Delay Audible Exit DelayEnable Quick Arm Set up MiscellaneousEnable Auto Bypass All On For AlarmFlash For Alarm Enable Freeze AlarmHouse Codes 1-4Format FORMATPage House Codes 1-4All OnTime Clocks ZONE NAME Latitude, Longitude, and Time ZoneDaylight Savings PageController Port Number Controller IP AddressNUMBER DESCRIPTIONPage Set Up NamesEncryption Key Set Up Address Set Up VoiceSET UP VOICE 1=CTRL 2=ZONE 3=BTTN ↓ 4=CODE 5=TEMP 6=AREA 8=MSG↑Page UNDERWRITERS LABORATORIES REQUIREMENTSFIRE ESCAPE PLANNING Page FEDERAL COMMUNICATION COMMISSION NOTICEPage CANADIAN INDUSTRY CANADA NOTICEIF YOU HAVE TROUBLE WITH YOUR PHONES Page APPENDIX A - DIAL OUT PLANNEROmni IIe Voice Dial-OutPlanner Page INSTRUCTIONS TO CALLED PARTYCODE CHAR APPENDIX B - TEXT DESCRIPTION CHARACTER CODESCODE CHAR CODE CHARCODE APPENDIX C - VOICE DESCRIPTION CODESDESCRIPTION CODEDESCRIPTION CODECODE DESCRIPTIONDESCRIPTION CODECODE DESCRIPTIONCODE DESCRIPTION CODE DESCRIPTIONCODE DESCRIPTION PagePage HAI New Orleans, LA U S A NOTE TO INSTALLER