Home Automation HOME AUTOMATION Set up Miscellaneous, Enable Quick Arm, Enable Auto Bypass, Page

Page 80

Enable Quick Arm

The Quick Arm feature allows the security system to be armed by pressing the desired mode key twice instead of having to enter your code.

The default setting for Enable Quick Arm is No.

Enable Auto Bypass

The Auto-Bypassfeature allows the system to automatically bypass an open zone when the system is armed, rather than setting off the alarm. In some applications, it may be preferable to allow arming only if all zones are secure (READY).

With Auto-BypassOff, all zones to be armed must be secure when the system is armed. Otherwise, the console will beep three times and display "ZONE NOT RDY". If the system is armed and a zone is open when the Exit Delay expires, the alarm will sound.

All On For Alarm

This option will instruct Omni IIe to execute an X-10 All On command in the event that any type of alarm occurs.

Beep On Trouble

If the Omni IIe detects any troubles with itself or one of the zones connected to it, it will display a message on the screen and beep the console twice per second, continuously (i.e. beep beep...beep beep...). You can silence this sound by pressing the ' * ' key. However, if the trouble occurs again, the beeper will start beeping again.

If you do not wish to hear the beeping sound when a trouble occurs, set Beep On Trouble to No.

The default setting for Beep On Trouble is Yes.

Set up Miscellaneous

To configure Miscellaneous items in the system, from the Set Up menu, press the 6 (MISC) key.

High Security Mode

In High Security Mode, the Master or Manager code is always required to do the following functions:

•Any Control functions

•Any Temperature Control

•View the Event Log

•Access the system from a local phone

With High Security Mode Off, no code is required to access a local telephone.

If your system is set up with High Security Mode On, the display will request the Master or Manager code whenever you select one of these functions, even if the security system is Off. Simply enter your Master or Manager code.

Your system was shipped from the factory with High Security Mode Off, which allows you to view the event log and access the local phones without having to enter a code. In most residential applications, this is appropriate. If you have a commercial installation, or would like added protection from unauthorized access to the system, you may wish to turn on High Security Mode.

Announce Alarms

If the HAI Two-Way Audio Module is being used in a system, this item enables the system to speak the type of alarm and zone over a speaker on premises. When an alarm first occurs, the siren is activated. After a few seconds, the siren is turned off and the type of alarm is announced. The siren is then reactivated.

The default for Announce Alarms is No.

Page 72

Page 79 Page 81
Image 80
Page 79 Page 81
Contents HOME AUTOMATION, INC Document Number 20R00-50Rev. JanuaryCopyright 2001-2006Home Automation, Inc All Rights ReservedINTRODUCTION OVERALL DESCRIPTIONSECURITY SYSTEM OPERATION ContentsCONTROL PC Access TELEPHONE CONTROLSETUP UNDERWRITERS LABORATORIES REQUIREMENTS FEDERAL COMMUNICATION COMMISSION NOTICECANADIAN INDUSTRY CANADA NOTICE APPENDIX A - DIAL OUT PLANNERPage Page INTRODUCTIONUnderwriters Laboratories UL Listing OVERALL DESCRIPTION Console Operation1- OFF 2- DAYNormal Top-LevelDisplay Display Menus6- UP ARROW 7- CONSOLE LEDError Beeps Main MenuTrouble Beeps To silence the beeper, press the * keyOmni IIe Maintenance CancelAreas Confirmation BeepSECURITY SYSTEM OPERATION Arming the Security System0 = OFF 1 = DAYUsing Shortcut Keys 2 = NIGHT3 = AWAY 4 = VACATION9 = RESTORE Quick ArmBypassing Zones Restoring ZonesWhat To Do When You Come Home What Happens When the Alarm is ActivatedBurglar Alarm Activated #=GOTOFire Alarm Activated Gas Alarm ActivatedEmergency Keys PageDuress Code Entered or Duress Alarm Activated Alarm ResetAlarm Cancel Police EmergencyTrouble Indications CodesMaster Code PagePanic Switches Duress CodeArea Arming Manager CodeGOTO Area PageTesting Your System PageControl Commands CONTROLAbout UPB PageWhen set to UPB, the Omni IIe controller can Room Controller LED IndicatorsHAI Lighting Control HLC Format About RoomsAbout Lutron RadioRA About House ControllersAbout CentraLite PageWhen set to RadioRA, the Omni IIe controller can About ALCAbout House CodesUnit Numbers Scrolling Through NamesControlling Units Omni IIe Unit NumbersConfiguring Lighting Scenes in an HLC Room StepOperation Controlling CentraLite Units PagePage Controlling RadioRA UnitsControlling ALC or X-10Units Page Ramp Command ALCControlling Compose Units Timed Commands Scene Command ComposeStatus of a Unit Internal FlagsControlling Outputs All On / OffWHEN ALL ON LINK 50 ON WHEN ALL OFF LINK 50 OFF WHEN ALL ON PHANTOM BUTTON 16 ONAll Lights On All OffLeviton Scene Control SceneScene Commands Scene Set CommandScene On Command Scene Off CommandSetting a Link Lighting Scenes Activating and Deactivating LinksExecuting Phantom Buttons Executing CentraLite ScenesButtons Temperature ControlLeave for Work Button Dinner for Two ButtonHAI RC-SeriesThermostats PageProgrammable Energy Saver Modules PESMs PageThe following control actions are allowed on PESMs PageFreeze Alarms IMPORTANT NOTESIndoor and Outdoor Temperature PageTemperature Alarms HumidityTemperature Control of Appliances PageConfiguring HLC Devices Configuring HLC Devices using an Omni ConsoleStatus PageSetup Mode for HLC Devices Step OperationStep Operation Step OperationONHK - ON HOOK OFFHK - OFF HOOKRING - RINGING DEAD - DEAD PHONE LINEEvent Log Show Events PagePage MessagesShow Message Log Message Clear MessageSay Message Phone MessagePage MSGNAMEENTER MESSAGE TELEPHONE CONTROL Telephone InterfaceIn-HousePhones Remote PhonesPhone Access Denied - Remote Lockout Alternate MethodMain Menu Page1 - Control 2 - Security3 - Button 4 - AllWhen an HAI Communicating Thermostat is entered When a Programmable Energy Saver PESM is entered6 - Status 7 - EventsWhen the HAI Two-WayAudio Module is being used 8 - Phone9 - Good-Bye Panic Button over the Phone # # # # # #Emergency Dial-Out Digital DialerVoice Dialer How the Omni IIe Voice Dialer WorksWhat the Omni IIe Voice Dialer Does What You Hear - If Your Omni IIe Calls YouEntering the Code PagePC Access Connecting to Network via PC AccessBuilt-InEthernet Port Omni IIe Ethernet ConnectionsLocal Network Dynamic DNS192.168.0.101 Hub or HAI Omni IIeRouter ControllerLocal / Wide Area Network i.ei.e PageSETUP Set Up CodesAccess Areas Authority LevelSet Up Time Duress CodeTIME PageAdvanced Control Programming ACP 1 = Add Programs2 = Show Programs PageMenu PagePage Edit Programs3 = Delete All Programs Page Edit Programs WhenTimes Programs Page Control Unit / Switch Press Event ButtonsButton and Event Programs Corresponding Switch Table SwitchOmni IIe UPB 6-ButtonKeypadPage Zone Event ButtonsAll On/Off Event Buttons Alarm Event Buttons UPB Link Event ButtonsX-10Event Buttons PagePage Miscellaneous Event ButtonsMessage Event Buttons Pro-Link Edit Program Command Switch Press Event Buttons CentraLiteProgram Control Commands PageUnit Toggle Command Program Security CommandsWHEN U1 SW UNIT 1 LED 3 ON WHEN LINK 1 ON Porch Light STATUSProgram Button Commands Program All On / All Off CommandsProgram Video Commands Program Temperature CommandsProgram Message Commands Edit Program ConditionProgram Control Conditions PageProgram Security Mode Conditions Program Zone ConditionsProgram Time Clock Conditions Program Other ConditionsSELECT CONDITION NEVER PageSet Up Dial Telephone AccessRemote Commands Answer Outside CallDial Out Number Dial Out NumbersDial Order PageSet Up Arming Entry DelayExit Delay Audible Exit DelaySet up Miscellaneous Enable Quick ArmEnable Auto Bypass All On For AlarmEnable Freeze Alarm Flash For AlarmHouse Codes 1-4Format FORMATPage House Codes 1-4All OnTime Clocks Latitude, Longitude, and Time Zone ZONE NAMEDaylight Savings PageController IP Address Controller Port NumberNUMBER DESCRIPTIONPage Set Up NamesEncryption Key Set Up Voice Set Up AddressSET UP VOICE 1=CTRL 2=ZONE 3=BTTN ↓ 4=CODE 5=TEMP 6=AREA 8=MSG↑Page UNDERWRITERS LABORATORIES REQUIREMENTSFIRE ESCAPE PLANNING FEDERAL COMMUNICATION COMMISSION NOTICE PagePage CANADIAN INDUSTRY CANADA NOTICEIF YOU HAVE TROUBLE WITH YOUR PHONES Page APPENDIX A - DIAL OUT PLANNEROmni IIe Voice Dial-OutPlanner INSTRUCTIONS TO CALLED PARTY PageAPPENDIX B - TEXT DESCRIPTION CHARACTER CODES CODE CHARCODE CHAR CODE CHARAPPENDIX C - VOICE DESCRIPTION CODES CODEDESCRIPTION CODECODE DESCRIPTIONCODE DESCRIPTIONCODE DESCRIPTIONCODE DESCRIPTIONCODE DESCRIPTION CODE DESCRIPTIONCODE DESCRIPTION PagePage NOTE TO INSTALLER HAI New Orleans, LA U S A
Top Page Image Contents