Log #4 (SRV2227-705): Mate the slot on the bottom of the log, shown in Figure 12, with the log pin located on the burner surface. The notch on the right end of the log should mate with the grate bar. See Figure 11.
SLOT
Figure 12. Log #4
LOG END
RESTS ON
FLAT SPOT
5
Figure 13. Log #5
Log #5 (SRV2227-706): Place the left end of the log on the fl at spot of log as shown in Figure 6. The right end of log should rest on the burner and touches the grate bar as shown in Figure 13.
6
MATE
NOTCH WITH
GRATE
BAR
Figure 14. Place Log #6
LOG GROOVES
Log #6 (SRV2227-704): Rest the left end of Log #6 on the burner. Mate the notch on the left end of log with the grate bar. The log should rest on both log grooves as illustrated in Figure 9 and Figure 10.
2227-935
32 | Quadra-Fire • QFI30, QFI35 • 2227-900 Rev. H • 1/11 |
