Taurus Group 2000, 2200 manual

work to its full potential.

-Disconnect the hose from the vacuum cleaner’s air intake.

-Disconnect the dust box from the appliance. (Fig. 4)

-Open the lid of the dust box

and empty the contents into the appropriate waste disposal receptacle.

-Check the condition of the dust box filter.

-Check the condition of the motor filter.

-Close the lid of the dust box.

-Attach the dust box to the appliance.

-Connect the hose to the vacuum cleaner’s air intake.

Changing the filters:

-Motor filter, it is advisable to be changed at least once a year or every 100 hours of the appliance’s use.

-To remove filters:

Motor filter:

-Disconnect the dust box from the appliance. (Fig. 4)

-The filter motor can be found in the motor’s turbine air entrance. -To reassemble the filter, proceed with the above instructions, in reverse order.

Outlet filter:

-Open the air outlet grate to access the filter.

-Remove the filter from its housing. -Change the filter.

-To reassemble the filter, proceed with the above instructions, in reverse order.

HEPA filter deposit:

-Disconnect the dust box from the appliance. (Fig. 4)

-Open the dust deposit lid.

-Remove the HEPA type filter deposit, by turning it in the direction indicated by the arrows (Fig. 5).

-Remove the HEPA filter protector. -Remove the filter from its housing. -To reassemble the filter, proceed with the above instructions, in reverse order.

Supplies

-Supplies can be acquired from distributors and authorised establishments (such as filters, etc.) for your appliance model.

-Always use original supplies, designed specifically for your appliance model.

Anomalies and repair

-Take the appliance to an authorised technical support service if problems arise. Do not try to dismantle or repair without assistance, as this may be dangerous.

-If the connection to the mains has been damaged, it must be replaced and you should proceed as you would in the case of damage.