2.Place the left log on the burner by setting the log in the left front corner of the burner up against the brackets. Note the location of the emboss on the log. (Fig. 50)
DVB4136 Direct Vent Gas Fireplace
Figure 50
Left Log
LG508
Rear Log
Figure 51
LG462
Locator Pins
Figure 52
4.Place the glowing embers by building them up lightly between the fettle and the burner tube assembly. (Fig. 52)
LG463
3.Place rear log. The rear log sits in the firebox at an angle toward the left over the rear log bracket and the left side of the burner. (Fig. 48) Set the log on the rear log pin. (Fig. 48) The right side of the log sits on the rear log bracket. Push the right side of the log back as far as it will go. (Fig. 51)
Glowing Embers
20012322 | 27 |