DVB4136 Direct Vent Gas Fireplace
Arch/Square Face Kit
for the DV4136 |
|
Romanesque - Arch |
|
41DVARFKB | Black |
41DVARFKR | Rustic Bronze |
41DVARFKS | Pewter |
Romanesque - Square |
|
41DVSRFKB | Black |
41DVSRFKR | Rustic Bronze |
41DVSRFKS | Pewter |
Marquette - Arch |
|
41DVAMTKB | Black |
41DVAMTKR | Rustic Bronze |
41DVAMTKS | Pewter |
Marquette - Square |
|
41DVSMTKB | Black |
41DVSMTKR | Rustic Bronze |
41DVSMTKS | Pewter |
Battery Backup
The use of the battery backup, Model DVTBBK, will allow your fireplace to continue operating in the event electric power lost.
Installation Procedure
CAUTION: If the fireplace has been operating, turn the fireplace off and allow it to cool completely before beginning installation.
1.Open bottom louvre. Find the female terminals on the unused red and black colored wires on the wire harness located behind the louvre opening.
2.Connect the terminals of the supplied battery holder to the red & black wires respectively.
3.Install four (4) fresh “AA” alkaline batteries into the battery holder. Note correct polarity of each battery.
4.Place the battery holder on the bottom of the fire- place.
5.Installation complete.
50 | 20012322 |