2.Enter the custom word number (01-20) you want to create.
For example, if you are creating the first word (or word string), enter 01; when creating the second word, enter 02, and so on. A cursor now appears at the beginning of the second line.
3.Type the word using one of two methods as follows:
a)Press [#], followed by the
When the desired character appears, press 6 to select it. The cursor will then move to the right, in position for the next character. Press [#] plus the
or
b)Press 3 to advance through the list of symbols, numbers, and letters. Press 1 to move back through the list.
When you have reached the desired character, press 6 to select it. The cursor then moves to the right, in position for the next character.
4.Repeat step 3 to create the desired custom word (or words). Press 4 to move the cursor to the left if necessary.
Press 7 to enter a blank (or to erase an existing character). Each word or word string cannot exceed 10 characters.
5.Save the word by pressing 8.
This returns you to the “CUSTOM WORD?” display. The custom word (or string of words) is automatically added to the
Custom words are retrieved as word numbers 250 to 269 for words 1 to 20, respectively, when using method 3a to enter alpha descriptors.
When using method 3b to enter alpha descriptors, each word appears at the end of the group of words that begin with the same letter as it does.
6.Repeat steps 2 through 6 to create up to a maximum of 20 custom words (or word strings).
7.Exit Custom Word Mode by entering 00 at the “CUSTOM WORD” prompt.
Partition Descriptors
1.Select "Part DESCRIPT." Mode.
The system asks for the partition number desired. Enter the number as a
2.Follow the same procedure as for custom words.
Note: The partition descriptors are limited to 4 characters (e.g., WHSE for warehouse).
– 19 –