Honeywell HCM-310T Setting UP Your Humidifier CONT’D, Placement, Some flooring, Soak Filter

HCM-300T_HCM-310T_OM.qxd 5/22/06 5:56 PM Page 4

SETTING UP YOUR HUMIDIFIER (CONT’D)

Placement	Step 1	Select a firm, level location at least 6” (15cm) from any
		walls for proper airflow. Place the humidifier on a water-
		resistant surface, as water can damage furniture and
		some flooring.
		Kaz will not accept responsibility for property damage
		caused by water spillage.
Soak Filter
	Step 1	Step 2	Step 3

	Remove the water tank	Remove the filter from	Place wet filter back in
	and carefully set aside.	the holding basket.	the filter holding basket
		Soak the filter in cool water.	and place back in unit.
		DO NOT squeeze filter.
Fill Tank	Step 1	Step 2	Step 3

	Turn tank upside-down.		Fill tank with cool		Once the filled water tank
	Remove tank cap by		tap water.		has been placed on the
					unit do not move
	turning counter-		Replace tank cap. Tighten
					humidifier. Doing so
	clockwise	.	by turning clockwise	.
					could cause leakage and
			Place tank back on
					spills.
			humidifier.
Power			With the power switch in the OFF position, plug the filled
	Step 1
			humidifier into a polarized 120V outlet. DO NOT FORCE
			THE POLARIZED PLUG INTO THE OUTLET; it will only fit
			one way.
			DO NOT plug in humidifier with wet hands to avoid
			electric shock.

4