ADT Security Services BHS-4000A user manual Using the Keypad

Page 17

Using the Keypad

The ADT security system in your home may have a Standard keypad or a Premium keypad. Both types of keypads can be used to turn the system on or off, or to test or customize it. For some procedures, the keypads’ commands are slightly different. In those cases, this manual contains two sets of instructions, like those shown below. If you are using a Standard keypad, follow the instructions on the left. If you are using a Premium keypad, follow the instructions on the right.

If the keypad looks like this:

If the keypad looks like one of these:

Follow the instructions for the Standard keypad.

Follow the instructions for the Premium keypad.

1. Observe the number displayed in

1. Press the OPTIONS key

the message window. This is the zone that is not ready (there may be more than one).

	2. Press the 7 key	2. Refer to the Pop-up Zone Card to
	2. Press the 7 key	verify the location of the zone.
		verify the location of the zone.

11

Image 17

Contents BHS-4000A System User’s ManualFCC Notice Consumer InformationIndustry Canada Table of Contents System Options System TestingWarranty Information Important Notices Questions and AnswersIf you have any questions about ADT Security System, visit WelcomeHow to Avoid False Alarms Standard Equipment ADT Home Security SystemStandard Equipment, cont’d Heat Sensor Optional EquipmentOptional Equipment, cont’d Optional FeaturesStandard Keypad PartsKeypad Parts of the Keypad Premium KeypadMessage Window Premium Keypad Status Display Standard KeypadCall 911 First Emergency KeysUsing the Keypad Designated Doors Entry DelayExit Delay Four On Modes Turning the System OnTurning the System On in Motion Off Mode Turning the System On in Normal ModeTurning the System On in Instant Mode Turning the System On in Motion Off/Instant ModeStandard Keypad Turning the System On When It Is Not ReadyBypass Turning the System Off Turning the System Off When No Alarms Are in ProgressTurning the System Off and Canceling an Alarm What to Do in an Actual Emergency Turning the System Off Without Canceling an AlarmTurning the System Off after an Alarm Occurs in Your Absence Bypass a Zone System OptionsTurn the Door Chime On or Off View Alarm MemoryStandard Keypad Premium Keypad Create an Additional Keypad CodeKeypad Code User Number Delete a Keypad CodeSiren and Transmission Test System TestingTesting All Burglary Sensors Testing the Doors and Windows Only Testing the Smoke DetectorDoor Chime Ready Testing With Not Ready ZonesUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Radio Problem Indication Optional Feature Communication Problem IndicationLine Cut Indication Optional Feature Zone Trouble Indication Smart·Key Wireless Remote Low Battery Optional FeatureUpload/Download Failure Call ADT Indication Component Failure IndicationSiren Failure Indication Keypad Not Working Speaker ClicksIf You Trigger an Alarm While Cleaning the Detector Cleaning the Smoke DetectorEmergency Evacuation Plans Setting the ClockService the Detector Every Two Years Page General Use of the System Questions and AnswersSecurity Passwords and Keypad Codes Emergency Contacts Alarms and EmergenciesFinancial Questions Additional Questions Warranty InformationRepairs and Upgrades VoIP Service Alarm Permits DSL ServiceImportant Notices UL InformationPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care