ADT Security Services BHS-4000A user manual Testing With Not Ready Zones

Page 35

Testing With Not Ready Zones

If the system is not ready to test, the message window reads NOT READY, or the READY light is off. Do the following:

Standard Keypad

1.Press the OPTIONS key.

2.Press the 7 key.

READY

3.Observe which zone number is displayed. This is the zone that is not ready.

4.Refer to the Pop-Up Zone Card to verify the location of the zone.

5.If the zone is a door or window, make sure that it is securely closed.

6. If the READY light turns on, conduct the test.

7. If the READY light does not turn on, call Customer Care at 800.445.0872 for assistance.

Premium Keypad

1.Observe which zone number is displayed. This is the zone that is not ready.

2.Refer to the Pop-Up Zone Card to verify the location of the zone.

3.If the zone is a door or window, make sure that it is securely closed.

4.If the message window now reads READY, conduct the test.

5. If the message window still reads NOT READY, call Customer Care at 800.445.0872 for assistance.

29

Image 35

Contents BHS-4000A System User’s ManualFCC Notice Consumer InformationIndustry Canada Table of Contents System Options System TestingWarranty Information Important Notices Questions and AnswersIf you have any questions about ADT Security System, visit WelcomeHow to Avoid False Alarms Standard Equipment ADT Home Security SystemStandard Equipment, cont’d Heat Sensor Optional EquipmentOptional Equipment, cont’d Optional FeaturesStandard Keypad PartsKeypad Parts of the Keypad Premium KeypadMessage Window Premium Keypad Status Display Standard KeypadCall 911 First Emergency KeysUsing the Keypad Designated Doors Entry DelayExit Delay Four On Modes Turning the System OnTurning the System On in Motion Off Mode Turning the System On in Normal ModeTurning the System On in Instant Mode Turning the System On in Motion Off/Instant ModeStandard Keypad Turning the System On When It Is Not ReadyBypass Turning the System Off Turning the System Off When No Alarms Are in ProgressTurning the System Off and Canceling an Alarm What to Do in an Actual Emergency Turning the System Off Without Canceling an AlarmTurning the System Off after an Alarm Occurs in Your Absence Bypass a Zone System OptionsTurn the Door Chime On or Off View Alarm MemoryStandard Keypad Premium Keypad Create an Additional Keypad CodeKeypad Code User Number Delete a Keypad CodeSiren and Transmission Test System TestingTesting All Burglary Sensors Testing the Doors and Windows Only Testing the Smoke DetectorDoor Chime Ready Testing With Not Ready ZonesUsing GoTo Optional Feature Trouble Messages No AC Power Indication Low Battery Indication Communication Radio Problem Indication Optional Feature Communication Problem IndicationLine Cut Indication Optional Feature Zone Trouble Indication Smart·Key Wireless Remote Low Battery Optional FeatureUpload/Download Failure Keypad Not Working Speaker Clicks Component Failure IndicationCall ADT Indication Siren Failure IndicationIf You Trigger an Alarm While Cleaning the Detector Cleaning the Smoke DetectorEmergency Evacuation Plans Setting the ClockService the Detector Every Two Years Page General Use of the System Questions and AnswersSecurity Passwords and Keypad Codes Emergency Contacts Alarms and EmergenciesFinancial Questions Additional Questions Warranty InformationRepairs and Upgrades UL Information DSL ServiceVoIP Service Alarm Permits Important NoticesPage Page Page Page Page Page Page Page Page Page Or call the ADT Customer Care